RX turbo 4WD selector microswitch

r00fi · Post by **r00fi** » Wed Jan 25, 2006 3:40 pm

There is a microswitch next to my RX turbo 4WD selector. I can toggle it with my finger but it doesn't seem to do anything.

I thought it would make those lame "4WD" dash lights come on.

Anyone know what it's for?

Wilbur · Post by **Wilbur** » Wed Jan 25, 2006 4:56 pm

It should be the "lo" switch. Thats what it was on myne until I broke it.

Fang · Post by **Fang** » Wed Jan 25, 2006 6:37 pm

Hmm.. It's not a "Diff Lock" switch is it? Flicks left and right?

Sits to the right of the 4wd selector.

r00fi · Post by **r00fi** » Thu Jan 26, 2006 2:16 pm

Not diff lock - it's a std dual range with no electric or vacuum

Lo range? Hmmm - is it supposed to light up something?

Gannon · Post by **Gannon** » Sat Jan 28, 2006 10:29 am

is it a factory switch or an aftermarket one?

If it is an aftermarket switch that somebody has fitted, it could do anything, you mite have to trace the wires to see where they go

Gannon.

r00fi · Post by **r00fi** » Sat Jan 28, 2006 3:08 pm

car is 100% standard...but not for long

muhahahahahaha

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Sat Jan 28, 2006 4:07 pm

The switch on the lever should turn the 4WD lights on the dash on and when you lift it another the switch in the gearbox should turn the low rage light on.

r00fi · Post by **r00fi** » Thu Feb 02, 2006 9:47 am

yep - it's the low range switch - apparently it works intermittantly.....

Thanks