My New Toy!!!!!

D3V1L · Post by **D3V1L** » Sun Jun 29, 2008 9:43 pm

hey guys just thought i would share what i just bought with u guys.

been home from work for 3 days and spend over $3500 in those 3 days. going back to work tomorrow for a little longer

ok what i have bought is... :

its awesome and i love it

it does however need a new axle and hub for the rear right as he stripped the splines on the shaft on his last outting 12 months ago

got a 1600cc VW motor which goes very hard
4 speed gearbox with good clutch lots of lighting and its all good!!

so hopefully when i get back from kal in a couple of weeks i can leave the outback at home and take out my new toy for some serious ass flogging around!!

peace out

dave

Subafury · Post by **Subafury** » Sun Jun 29, 2008 9:51 pm

looks cool but its no wackybug. how are ya gona transprt it around?

D3V1L · Post by **D3V1L** » Sun Jun 29, 2008 9:58 pm

transport with ur mum

there was no intention to be like wacky bug? who mentioned wacky bug? go back and hide under ur rock matt

it will be getting an EJ as the very next step once i work out how to attatch a subaru motor to the transverse vw gearbox

dave

Matatak · Post by **Matatak** » Sun Jun 29, 2008 10:09 pm

mating the EJ to a VW box needs a very weirdass Adapter plate. (speak to seagull

)

looks ok lol. but lets see her going

most people use the FWD Autos out of Libs iver been told as there only RWD.

Suba · Post by **Suba** » Sun Jun 29, 2008 10:10 pm

Play nice kiddies

.

Mike.

Post by **Alex** » Sun Jun 29, 2008 10:22 pm

she looks good. and its only like 1km from my house

alex

D3V1L · Post by **D3V1L** » Sun Jun 29, 2008 10:38 pm

im getting there..was rather cheap but does need a bit of work..motor has had a full rebuild so should last me untill i work out the subaru motor converstion

but having a broken axel and hub the thing CAN NOT BE DRIVEN untill i replace the two parts caus oil and shit and everything will go everywhere... so hopefully when i get back a few hours worth of swapping parts will be the easy work then i can have some fun

always wanted one of these since before i got into subaru's and now i finally own one im gonna make the most of it.

dave

D3V1L · Post by **D3V1L** » Sun Jun 29, 2008 11:07 pm

Suba wrote:Play nice kiddies .

Mike.

and you are more then welcome to come and play mike:) you know your always welcome to play with my toys (meant in a non sexual way)

dave

BrennyV · Post by **BrennyV** » Sun Jun 29, 2008 11:19 pm

haha looks like a kewl little setup. cant wait to get in on the modding

D3V1L · Post by **D3V1L** » Sun Jun 29, 2008 11:25 pm

yes brendan:) you owe me a few hours of hard labour

dave

BrennyV · Post by **BrennyV** » Sun Jun 29, 2008 11:28 pm

or a few days of layed back labour

cant rush perfection

D3V1L · Post by **D3V1L** » Sun Jun 29, 2008 11:38 pm

bahahaah true fact:)

Subafury · Post by **Subafury** » Mon Jun 30, 2008 12:10 am

D3V1L wrote:transport with ur mum

there was no intention to be like wacky bug? who mentioned wacky bug? go back and hide under ur rock matt

dave

wtf dave im the one under a rock?!

obviously the idea of buying this would of been helped along by your like for the wackybug buggy's offroad fun. and yours is very simiar since i have to spell it out.

D3V1L · Post by **D3V1L** » Mon Jun 30, 2008 12:12 am

ive wanted one of these since i was 10, so no wacky bug had nothing to do with it really. after all......it would have been cheaper to buy and old my wagon and hack it up

seagull · Post by **seagull** » Mon Jun 30, 2008 1:41 am

Dave , the swing axel box is very weak .I would not advise fitting a subaru ej22 to it .

now days we use the ej front wheel drive auto or manual gear box and turn it around so the motor is behind your seat .If I recall Matt has a very good front wheel drive auto at his place. The problem you haver is your buggy is swing axel an IRS ( cv ) rear is needed as you make a drive axel adapter from subaru > vw .If you would like to have a look at a set up like this I can give you a number so you can check maxes out .He is nearly 60ie and still building and racing these machines .

was this corries machine ??

tex · Post by **tex** » Mon Jun 30, 2008 3:18 am

For the ej its quite a common conversion so if you word up a good VW shop they should be able to help you out with an adapter plate (you can get these for almost any engine if you know where to look), I've seen an ecotec V6 on a VW plus while your at it ask about getting a lift kit welded in the front mine cost me $200 done in a shop to make sure it was straight (Pre 72 non mcpherson struts) and its an easier job to lower the rear just unbolt the trailing arms then realign them down. Again the VW shop can help you out with this or you could get reduction hubs from a combi but Ive heard these are hard to come by and quite weak! There are some very strong VW boxes out there but I cant remember what to look for but IRS is the go!
Also I take it its a 12 volt set up because the bell housing and everything is different I ground mine out but it might give some complications with the flywheel in a conversion. Hope these tidbits of info help they are tons of fun!

AndrewT · Post by **AndrewT** » Mon Jun 30, 2008 11:32 am

I've heard the combivan gearboxes are the strongest but i'm no expert. Mate of mine used to have a Pervis Eureka which had a Volvo V6 motor adapted to one of those gearboxes and it worked pretty well.

Adaptor plates for heaps of different motors are available for VW bellhousings so shouldn't be a problem.

U guys are forgetting Dave has an awesome car trailer so transport shouldn't be an issue!

Looks like it will be great fun Dave, I'll have to be careful I don't run over you in WackyBug once she gets her new shoes

BrennyV · Post by **BrennyV** » Mon Jun 30, 2008 11:39 am

AndrewT wrote:Dave, I'll have to be careful I don't run over you in WackyBug once she gets her new shoes

ahhaha i see demo derby action in the future

D3V1L · Post by **D3V1L** » Mon Jun 30, 2008 11:49 am

BrennyV wrote:ahhaha i see demo derby action in the future

oooOOooo!!!! its on !!!!:twisted:

D3V1L · Post by **D3V1L** » Mon Jun 30, 2008 11:50 am

thanks for the info neil and tex, im learning the ropes so should be good