Who had....
Who had....
the lifted WRX ?
- Outback bloke
- Senior Member
- Posts: 2103
- Joined: Fri Sep 30, 2005 10:00 am
- Location: Morayfield - Queensland
- Contact:
I know some one else that should have one. Fulysik mate. Look shweet with 4 lights across the roof and 2 scared of the dark big suckers on the front. Also look awesome with a set of rod holders and some surf rods hanging off it.
I think the other lifted one you are thinking of was not a WRX but an Impreza non-turbo. Gravel-X maybe.
I think the other lifted one you are thinking of was not a WRX but an Impreza non-turbo. Gravel-X maybe.
- Suby Wan Kenobi
- General Member
- Posts: 1914
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Sunny Godwin Beach Qld
- tim_81coupe
- General Member
- Posts: 1693
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Perth
Danger posted a picture of it didn't he??
SubiParts Australia - Australia's BIGGEST Aftermarket Subaru Parts Specialist
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
- Outback bloke
- Senior Member
- Posts: 2103
- Joined: Fri Sep 30, 2005 10:00 am
- Location: Morayfield - Queensland
- Contact:
- vincentvega
- Senior Member
- Posts: 2446
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Brisvegas
- Contact:
for you wilbur:



My car has a quad cam Outback motor, running an Outback computer through a WRX Wiring loom.
I have modified the settings of some sensors to get better fuel efficiency while retaining or improving the performance.
The gearbox has a 12 pound STI rally centre diff and a low range out of an L series, standard Liberty gear set, the box is now a 3.9 ratio.
Viscous LSD at the rear. There is a speed converter to make Speedo accurate. (more accurate than original)
WRX exhaust with a mod to bridge where the turbo would normally be.
Outback struts all round with a 2 inch lift kit. Alloy front suspension arms.
Standard Forester Metal rims with off road rubber. (Alloy's would not be suitable for the bush!)
Headlights are direct replacements from Cibie.
There is a heat exchanger under the bonnet for running hot water.
A dual battery runs the fridge that is mounted in the boot.
Customer made Roof rack for the spare.



My car has a quad cam Outback motor, running an Outback computer through a WRX Wiring loom.
I have modified the settings of some sensors to get better fuel efficiency while retaining or improving the performance.
The gearbox has a 12 pound STI rally centre diff and a low range out of an L series, standard Liberty gear set, the box is now a 3.9 ratio.
Viscous LSD at the rear. There is a speed converter to make Speedo accurate. (more accurate than original)
WRX exhaust with a mod to bridge where the turbo would normally be.
Outback struts all round with a 2 inch lift kit. Alloy front suspension arms.
Standard Forester Metal rims with off road rubber. (Alloy's would not be suitable for the bush!)
Headlights are direct replacements from Cibie.
There is a heat exchanger under the bonnet for running hot water.
A dual battery runs the fridge that is mounted in the boot.
Customer made Roof rack for the spare.
- vincentvega
- Senior Member
- Posts: 2446
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Brisvegas
- Contact: