EJ18 won't start in the cold :(
- joe_ritson
- Junior Member
- Posts: 41
- Joined: Wed Apr 05, 2006 10:00 am
EJ18 won't start in the cold :(
My Brumby is really giving me the shits.. It's a factory EJ, and using the choke, pumping the accellerator and every other trick in the book just won't start it in under five minutes.
Can anyone suggest a fix for this problem before I pull ALL my hair out?
Can anyone suggest a fix for this problem before I pull ALL my hair out?
I assume you mean ea81 ? I don't think the brumby's ever came out from the factory with an ej18 
Are you pulling the choke all the way out? my old ea81 needed the choke to be about 1/3 to 1/2 of the way out any further and it would be as hard to start as without choke.
Maybe get a can of that instant starter stuff and spray it into the carb ... see if that gets it kicked over straight away ... can probably spray it into the filter box through the fitting for the rocker cover return hose that way it bypasses the filter and you don't need to disassemble much.

Are you pulling the choke all the way out? my old ea81 needed the choke to be about 1/3 to 1/2 of the way out any further and it would be as hard to start as without choke.
Maybe get a can of that instant starter stuff and spray it into the carb ... see if that gets it kicked over straight away ... can probably spray it into the filter box through the fitting for the rocker cover return hose that way it bypasses the filter and you don't need to disassemble much.
What's your starting procedure?
With my stock standard EA81, I switch the ignition to "on" and allow the fuel pump to prime the carby, then pull the choke out full and rest my foot on the throttle - usually starts first go.
With my stock standard EA81, I switch the ignition to "on" and allow the fuel pump to prime the carby, then pull the choke out full and rest my foot on the throttle - usually starts first go.
Monster Subaru sold to a good home!! Still a Subaru owner. Will try stay in the Ausubaru loop. Sorry 

- joe_ritson
- Junior Member
- Posts: 41
- Joined: Wed Apr 05, 2006 10:00 am
- joe_ritson
- Junior Member
- Posts: 41
- Joined: Wed Apr 05, 2006 10:00 am
- tim_81coupe
- General Member
- Posts: 1693
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Perth