L-Series Speedos

wrx_nut · Post by **wrx_nut** » Thu Mar 09, 2006 6:41 pm

can you wind the odomoter back on an L-series speedo?

Im interested as i am converting to ea82t, & putting the turbo dash in and would like the same reading as what the old dash was.....

cheers

wrx_nut

Chris_Rogers · Post by **Chris_Rogers** » Thu Mar 09, 2006 6:55 pm

yes it can be done. pop it apart,pop the dial out, set it, put it back in. did the same thing to a sherpa dash years ago ( it reads '0' as I rebuilt the car.)

Fang · Post by **Fang** » Thu Mar 09, 2006 6:57 pm

I just received one from NZ today - a RX turbo dash (diff lock, etc) it has 192k on it. The same one in my car now has 107k

Only paid NZ$25 for the dash - finding one of similar kms might be the way to go.

Chris_Rogers · Post by **Chris_Rogers** » Thu Mar 09, 2006 7:04 pm

fang,
run it by and I'll set it for you.

wrx_nut · Post by **wrx_nut** » Fri Mar 10, 2006 8:32 am

thanks...might pop it out and give it a go
cheers

wrx_nut · Post by **wrx_nut** » Mon Mar 27, 2006 5:18 pm

ive just lifted my L series 3" and now the speedo cable doesnt reach....which one should i get so it reaches and fits..?
cant find the post of the discussion of the different speedo cables...

cheers

wrx_nut

Subaman · Post by **Subaman** » Tue Mar 28, 2006 7:37 am

One from an L Series automatic will do the trick

smoov · Post by **smoov** » Tue Mar 28, 2006 3:00 pm

failing that, an auto MY one will also do too

wrx_nut · Post by **wrx_nut** » Tue Mar 28, 2006 7:01 pm

cheers....might go to the wreckers

wrx_nut · Post by **wrx_nut** » Mon May 01, 2006 6:10 pm

got one from a ea81 Leone front wheel drive
fits with a bit of left over length..
perfect for an L with a 3" lift

The AUSubaru.com.au Forums

L-Series Speedos

L-Series Speedos

Re: L-series speedo's