ea81 to ea82 carby

heath: Junior Member; Posts: 165; Joined: Wed Apr 09, 2008 5:03 pm; Location: ferntree gully

Quote

Post by heath » Tue Jun 03, 2008 5:01 pm

this might sound stupid to some people but does the ea82 carb bolt up the same as the ea81

Xtreme_RX: Junior Member; Posts: 741; Joined: Thu Oct 06, 2005 10:00 am; Location: Deception Bay, QLD

Quote

Post by Xtreme_RX » Tue Jun 03, 2008 7:12 pm

Only on 83+ motors or large port EA81.

SubiParts Australia - Australia's BIGGEST Aftermarket Subaru Parts Specialist
http://www.subiparts.com.au

BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD

heath: Junior Member; Posts: 165; Joined: Wed Apr 09, 2008 5:03 pm; Location: ferntree gully

Quote

Post by heath » Tue Jun 03, 2008 7:48 pm

is it hard to do can it be done easier

Xtreme_RX: Junior Member; Posts: 741; Joined: Thu Oct 06, 2005 10:00 am; Location: Deception Bay, QLD

Quote

Post by Xtreme_RX » Wed Jun 04, 2008 7:48 am

Just need to change the inlet manifold to the later model.
The stud spacing for the carb is different.

SubiParts Australia - Australia's BIGGEST Aftermarket Subaru Parts Specialist
http://www.subiparts.com.au

BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD