ea82 gear box onto ea81 engine
ea82 gear box onto ea81 engine
does anyone no how hard this is to do. are the bell housing bolts line up or do i have to make a boss kit
Search and you will find...this topic has been covered a few times 
The bell housing pattern is the same, you have to fiddle with the 4wd selector mount length as the L series uses a different mechanism. EA82 box is different length than EA81 so you need a custom-length tailshaft or you can use the L series 2-piece unit.
Dean.
The bell housing pattern is the same, you have to fiddle with the 4wd selector mount length as the L series uses a different mechanism. EA82 box is different length than EA81 so you need a custom-length tailshaft or you can use the L series 2-piece unit.
Dean.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.