liberty missin

90brumby · Post by **90brumby** » Mon Jan 28, 2008 12:04 pm

ok so i have a 1990 lib gen 1 with a ej22
every mornin or after its been sat 4 a while it will miss fire and even stall out when i start it

its got a new air & fuel filter i changed the plugs 2 days ago the old plugs appered to b a browny rusty colour i pulled a plug bak out yesterday it was the same rusty colour

the problem seams to b worse if i have the air con on
im thinkin its done a head gasket n the water is getting into the bores it does lose a bit of water.

any1 had anythin like this b4

i use to run it on ULP but since this ive been using PULP and sometimes addin octane booster

FROG · Post by **FROG** » Mon Jan 28, 2008 12:11 pm

get your coolant gas checked.......
but i think your up for a hj....

see here
showthread.php?t=8260

90brumby · Post by **90brumby** » Mon Jan 28, 2008 12:26 pm

ye thats wat i thought ive got a gas checker at home but i just dont want it to have done a head gasket i do have a spare ej22 at home i can put it

but yes i think i might b up 4 a rebuild as well dave and i rebuild his rex motor so im sure this will b easyer

Matatak · Post by **Matatak** » Mon Jan 28, 2008 11:11 pm

rebuild alexs at the same time

read the title thinkin ur liberty had been stolen. glad it wasnt tho

SuBaRiNo · Post by **SuBaRiNo** » Mon Jan 28, 2008 11:27 pm

Any Steam out of the exhaust?

Dave

90brumby · Post by **90brumby** » Mon Jan 28, 2008 11:40 pm

no none wat so eva but the exhaust pipe is a nice clean colour

ill take a pic of the plug n show u guys l8r

Post by **Alex** » Tue Jan 29, 2008 1:48 pm

Matatak wrote:rebuild alexs at the same time

read the title thinkin ur liberty had been stolen. glad it wasnt tho

spakatak shutup....its been tested numerous times. No head gasket problems.

alex

Matatak · Post by **Matatak** » Tue Jan 29, 2008 2:16 pm

bring it to me alex i want to test it myself

. It burns water from somewhere lol

Morcs · Post by **Morcs** » Tue Jan 29, 2008 4:03 pm

My Brumby Used to do that woulnt come good untill it warmed up. Funny thing was that mine would start on all 4 then it would drop back to 3 after running for bout 30secs. This was from a cold start. The coil was the culprat.

Not sure wether yours has coil on plug type though, thats wat i have on mine