Opinions on beach buggy
Opinions on beach buggy
Got myself a beach buggy just before Xmas. Wanting some opinions on what is my best move with it.
From what i can tell at some stage it has been a taipan as it has had the floorpan shortened some 14 odd inches. Had a VW 1600 in the back of it that was missing the starter, clutch and flywheel and otherwise condition unknown. At present I am doing a wrx conversion on my car and am planning on putting the ej18 out of my car in the buggy. To do this i need a VW flywheel and then get in modified to suit the subaru engine pattern. Already have an adapter plate.
My other option i have is an ea82. Dad has a low k's engine sitting in the shed with adapter plate already on it mounted to a VW gearbox. If i go this option then I will need to sell the EJ18 as i dont have the room to store it.
If possible i wanna get this done as cheap as possible as i have next to no cash to play with due to 3 month old baby.
Anyone know a place i can get the flywheel made at a good price?
Anyone interested in an ej18 with about 200,000 ks with full loom, computer, fwd 5 speed and even the rear 2wd assembly?
Ideas?
From what i can tell at some stage it has been a taipan as it has had the floorpan shortened some 14 odd inches. Had a VW 1600 in the back of it that was missing the starter, clutch and flywheel and otherwise condition unknown. At present I am doing a wrx conversion on my car and am planning on putting the ej18 out of my car in the buggy. To do this i need a VW flywheel and then get in modified to suit the subaru engine pattern. Already have an adapter plate.
My other option i have is an ea82. Dad has a low k's engine sitting in the shed with adapter plate already on it mounted to a VW gearbox. If i go this option then I will need to sell the EJ18 as i dont have the room to store it.
If possible i wanna get this done as cheap as possible as i have next to no cash to play with due to 3 month old baby.
Anyone know a place i can get the flywheel made at a good price?
Anyone interested in an ej18 with about 200,000 ks with full loom, computer, fwd 5 speed and even the rear 2wd assembly?
Ideas?
Yeah bit of a toss up...
EA82 is attractive option becuase it's simpler to wire up / get going and already has the adaptor plate.
EJ18 will require more work to put in (wiring loom cut down, make another adaptor plate etc). At least the adaptor plate is pretty easy to make. It will be alot more powerful
EA82 is attractive option becuase it's simpler to wire up / get going and already has the adaptor plate.
EJ18 will require more work to put in (wiring loom cut down, make another adaptor plate etc). At least the adaptor plate is pretty easy to make. It will be alot more powerful

EZ30 L series - Monsterwagon
https://www.ausubaru.com.au/viewtopic.php?f=71&t=26163
https://www.ausubaru.com.au/viewtopic.php?f=71&t=26163
yeah i have an adaptor plate to suit it already, just need the flywheel made up. Just a matter of not having a great deal of cash to spend on it at present. EJ 18 will need new timing seals and may as well do the belt at the same time. EA 82 is pretty much ready to go.AndrewT wrote:Yeah bit of a toss up...
EA82 is attractive option becuase it's simpler to wire up / get going and already has the adaptor plate.
EJ18 will require more work to put in (wiring loom cut down, make another adaptor plate etc). At least the adaptor plate is pretty easy to make. It will be alot more powerful
- AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
Go for EJ18 conversion - EJ18 has a bit more power output than EA81 - you wont be disappointed and maybe later you could use EJ22 and the conversion is pretty easy because they're very very similar engines between EJ18 - 22.. where abouts if you had EA82 and you decided to change it to EJ series in the future it would be more work - so for what its worth - use EJ18 engine..
Cheers
AP
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

I got 2 little fellas and heaps of coin for my toys! obviously your in the wrong industry cobbseagull wrote:were a condom next time , more coin for toys

[SIGPIC][/SIGPIC]
VER7 STI (FOR SALE) & RIP EJ22 AWD LEONE
PIX @ www.webshots.com/user/4muff
I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
Hunter S. Thompson
http://www.brainyquote.com/quotes/quote ... 02861.htmlI hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
Hunter S. Thompson
- last celtic warrior
- Junior Member
- Posts: 271
- Joined: Mon Aug 06, 2007 9:39 pm
- Location: Gympie, Queensland
Which motor is right depends on what you want to use the buggy for and where you're going to put it.
I have two beach buggies at the moment and have been into them for years. I've seen good and bad arise from changing to a different motor, in buggies and Baja Bugs (and all sorts of other cars too). If it's going to be lightweight and basic and will be used in wet and nasty terrain, then an original air cooled motor is usually the way to go. Otherwise, if you're going to be doing a lot of highway and smoother off-road work, I'd suggest maybe the EA82. With no dusty or wet driving, as in no creek crossings or beach driving, then the EJ18 could be really good and very potent.
Buggies, being such a basic and stripped down vehicle, really do need to be built us with their purpose already known and prepared for.
I have two beach buggies at the moment and have been into them for years. I've seen good and bad arise from changing to a different motor, in buggies and Baja Bugs (and all sorts of other cars too). If it's going to be lightweight and basic and will be used in wet and nasty terrain, then an original air cooled motor is usually the way to go. Otherwise, if you're going to be doing a lot of highway and smoother off-road work, I'd suggest maybe the EA82. With no dusty or wet driving, as in no creek crossings or beach driving, then the EJ18 could be really good and very potent.
Buggies, being such a basic and stripped down vehicle, really do need to be built us with their purpose already known and prepared for.
Steve.
- BARNES AUTOMOTIVE TECHNOLOGIES -
- BARNES AUTOMOTIVE TECHNOLOGIES -