Brakelines for Lifted 2" Brumby

Matt · Post by **Matt** » Mon Dec 19, 2005 9:40 pm

Does anyone know what brakelines you can use for the front of 2" lifted Brumby? The originals are just long enough however they need replacing so i thought i might get some longer ones? I got some PBR ones today but they are wrong
Thanks in advance
Matt

xaymaca · Post by **xaymaca** » Mon Dec 19, 2005 9:57 pm

Take your old ones into a brake place and get some braided lines made up (longer than the originals of course).

I'm not sure if Enzed of Pirtek will have brake fittings, but a brake place I went to for my RX7 were able to make some up.

rsrlegacy · Post by **rsrlegacy** » Mon Dec 19, 2005 11:07 pm

I have never fitted longer 1s yet in the 50 plus kit fits. Just need the right brackets.

xaymaca · Post by **xaymaca** » Mon Dec 19, 2005 11:16 pm

It's true, you do not need longer ones for fitting a 2" kit. However, he said they need replacing anyway so basically just cut out the fact that he just put a lift kit in, and he's asking where he can get replacement lines made up.

Matt · Post by **Matt** » Tue Dec 20, 2005 7:49 pm

rsrlegacy i agree with you, how ever as xaymaca said i need to replace them anyway. I ended getting some made at enzyed for like $90. Right length and right connectors, word of warning they are inverted flares on the female end.
Thanks
Matt