Brumby and Wagon fuel tanks??

Having issues with your ride ? Ask away in here ...
Post Reply
User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Brumby and Wagon fuel tanks??

Post by SuBaRiNo » Thu Jul 12, 2007 9:34 pm

Are these the same?? Im aware they made 2 different size tanks for the wagons... i can only assume the brumbys were the same.

I ask because... My brother has a 89 brumby that appears to need a replacement fuel tank... i figure it will be a million times easier to find a wagon tank than a brumby one.

Dave
EJ conversion wiring harness cut downs available. Please PM or email ([email protected]) for details.

User avatar
Matatak
Senior Member
Posts: 2393
Joined: Fri May 04, 2007 8:06 pm
Location: Gnangara next to pines

Post by Matatak » Thu Jul 12, 2007 10:21 pm

sounds like ur bros brumby needs a fair bit of work..
somethign to keep u busy with lol
Image
Wagon is no longer....:(

The Subaru Wacky Workshop
-All About the WA Boys :D

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Fri Jul 13, 2007 12:07 am

swear my red 84 Brumby has a 60 litre tank, uncle says my white 92 Brumby runs out at 50 litres !!

User avatar
90brumby
General Member
Posts: 1178
Joined: Mon Jan 29, 2007 10:58 pm
Location: Perth w.a

Post by 90brumby » Fri Jul 13, 2007 12:24 am

mine runs out at bout 50 as well i put 38leters in when the gauge was half full at our last 4x4 trip n yer it leaks so yer i think its only a 50lter tank


but does ny1 no if there the same mines got a hole at the top (dam tex screws through the tray)

i am wantin to fix this aswell
The New Owner Of hatchie
A 00 outback for doner car
2 door wrx being restored

owned plently of other subis before

User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Sat Jul 14, 2007 10:09 am

tex screw through the tray ! that's like me mate fitting his ED Falcon towbar, needed a bracket rivetted to the base of the spare tyre well. Rivet needed a hole drilled first. Spare needed to be removed first - and that was not in the instructions !!

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Sat Jul 14, 2007 6:27 pm

So anyone know if wagon and brumbys have the same tank???

They sure look the same.

Dave
EJ conversion wiring harness cut downs available. Please PM or email ([email protected]) for details.

User avatar
tassyraider
Junior Member
Posts: 87
Joined: Wed Dec 14, 2005 10:00 am
Location: tas

Post by tassyraider » Sat Jul 14, 2007 7:57 pm

hi iv fitted early 80s wagon tank in 86 brumby,modded it for conversion dont no what the fuss is about fitted fine.befor modded defumed it.cheerz mick
current ej18 awd targa brumby
95 impreza awd sportz wagon

User avatar
90brumby
General Member
Posts: 1178
Joined: Mon Jan 29, 2007 10:58 pm
Location: Perth w.a

Post by 90brumby » Sat Jul 14, 2007 11:05 pm

i reckon they should fit
The New Owner Of hatchie
A 00 outback for doner car
2 door wrx being restored

owned plently of other subis before

User avatar
El_Freddo
Master Member
Posts: 12637
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Mon Jul 16, 2007 3:35 pm

90brumby wrote:i reckon they should fit
Yeah, i don't see why not, they're pretty much the same chassis design, just different body setup... wouldn't be too hard to make it fit unless there's a major suspension component in the way...

Cheers
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Mon Jul 16, 2007 4:57 pm

Dave I have a carb tank out at home you could have, I could not see why it would be different however its out of the car atm so we can have a closer look if you like.
Toyota 105 Series LandCruiser (that nobody on here wants to really hear about).
RX Touring Wagon - fitted out for 4WDing (currently collecting dust).
RX Project - will be road only at this stage (and currently taking way to long to finish).

User avatar
SuBaRiNo
Senior Member
Posts: 2893
Joined: Tue Oct 04, 2005 10:00 am
Location: Perth, WA
Contact:

Post by SuBaRiNo » Mon Jul 16, 2007 8:39 pm

Is it out of an L or and MY Jaf? I assume it's from an L since u have no MY parts. It wont fit if it's out of an L.

Dave
EJ conversion wiring harness cut downs available. Please PM or email ([email protected]) for details.

Post Reply

Return to “Trouble Shooting”