EA82T lurching
yer i checked over the I/C pipes and they were all good... gotta plum the bov back into the intake (standard rs) doesnt llike venting to atmosphere :P
other than that i was thinking a sensor of some sort.....
when i first did the conversion it did run rich on idle and still does...
what would make it run rich>? dead oxy sensor?
other than that i was thinking a sensor of some sort.....
when i first did the conversion it did run rich on idle and still does...
what would make it run rich>? dead oxy sensor?
85' Touring Wagon, EA82T, 3" Lift, 27's, RS intercooler
90' Brumby (B&S Project!) still cutting rust :P
90' Brumby (B&S Project!) still cutting rust :P
- Suby Wan Kenobi
- General Member
- Posts: 1914
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Sunny Godwin Beach Qld
Been still having the prob with mine. Did plugs, leads, rotar, exhaust/oxy sensor, rotar cap, fuel filter, canister, clean fuel lines, check for vac leaks etc.
Its running rich when it does it too as the back of the car is getting black on it. Find sometimes when it does it leave clutch out and turn car off then on then its fine.
Happens so quickly cant get a reading off the flashing lights on computer. If anyones gets any results working it out seems we are all having the same frustrating issues.
Its running rich when it does it too as the back of the car is getting black on it. Find sometimes when it does it leave clutch out and turn car off then on then its fine.
Happens so quickly cant get a reading off the flashing lights on computer. If anyones gets any results working it out seems we are all having the same frustrating issues.