noisy diff...

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
AlpineRaven
Senior Member
Posts: 3682
Joined: Wed Oct 19, 2005 10:00 am
Location: Melbourne, Victoria, Australia.

noisy diff...

Post by AlpineRaven » Mon Apr 09, 2007 2:15 pm

About 2 weeks ago I went in another Liberty (2nd Gen) with a mate of mine driving to Horsham and back to Melbourne, somehow I realised his Liberty was quieter and made me thought about it... Well for past two weeks since hearing his Liberty and made me think "where is the noise coming from" and I realised its coming from the rear... I changed the tyres from rear to front... no change... and had a another mate in last Thursday and he said you have noisy diff (I'm hearing impaired myself and cannot verify where the noise would be) went to mechanic's, he said your diff is shot...

What is the best thing to do from here? Before confirming that the diff is shot, is there any type of diff oil that I should try to see if it does make noise change?

Liberty has done 250,000 kms running strong - gearbox is smooth but diff is ????

Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
Image

User avatar
BrennyV
Senior Member
Posts: 2573
Joined: Wed Oct 05, 2005 10:00 am
Location: Pussy Town

Post by BrennyV » Mon Apr 09, 2007 2:24 pm

your safer bet is just to put the new diff in... propper diff oil may make it go away for a wile but they are cheep and easy to replace.
[SIGPIC][/SIGPIC]
VER7 STI (FOR SALE) & RIP EJ22 AWD LEONE
PIX @ www.webshots.com/user/4muff

I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
Hunter S. Thompson
http://www.brainyquote.com/quotes/quote ... 02861.html

User avatar
AlpineRaven
Senior Member
Posts: 3682
Joined: Wed Oct 19, 2005 10:00 am
Location: Melbourne, Victoria, Australia.

Post by AlpineRaven » Mon Apr 09, 2007 6:01 pm

Came home after spending the weekend, went to the shed found 2 3.7:1 diffs (one from 2nd Gen Lib & 1 L Series diff) The L Series is a better one but the internals has to be changed for 2nd Gen... So will give it a go...

By the way, should I replace the bearings before putting it in?
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
Image

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Mon Apr 09, 2007 9:22 pm

Your rear diff could be quietened cheaply just depends whats wrong with it. The ring gear may not be alligned propperly with the crown wheel, this can be fixed by getting the stub axels re-shimmed. Usually a pro job though.

User avatar
chriSTIan
Junior Member
Posts: 397
Joined: Wed Oct 05, 2005 10:00 am
Location: PERTH,WA

Post by chriSTIan » Tue Apr 10, 2007 8:29 am

Check wheel bearings first!
I also suspected a noisy diff in my legacy,put it on a hoist and found out it was the l/h rear wheel bearing.
Put it on a hoist,start car ,put it in gear and listen.
It was very noticeable.
Chris

Post Reply

Return to “Subaru Chat”