A/T reversing lights switch

Get the most out of your ride & how to make enhancements ...
Post Reply
User avatar
timmo
Junior Member
Posts: 525
Joined: Mon Aug 07, 2006 5:37 pm
Location: Mansfield [VIC]

A/T reversing lights switch

Post by timmo » Sun Nov 12, 2006 3:59 pm

Hey all

just working out how i'm gonna wire up the reversing lights. Where is the switch - is it on the gear selector in the cockpit or on the transmission. I need this coz the donor car is an A/T whereas i'm using the 5spd DR but using the A/T loom.

Thanks,

Timmo
L series wagon EA82T (RIP)
'92 Liberty RS Turbo
GU Patrol Ute
Honda XR400R

User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Sun Nov 12, 2006 6:23 pm

on the auto ea82 it comes from the shifter big white plug at the trans tunnel inside the car.Shouldn't be to hard to locate which wire and splice in.also you'll have to connect/loop the inhibtor switch to drive or park or the starter won't turn over,also on the same plug.
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

User avatar
timmo
Junior Member
Posts: 525
Joined: Mon Aug 07, 2006 5:37 pm
Location: Mansfield [VIC]

Post by timmo » Sun Nov 12, 2006 7:15 pm

Thanks for that postie. After another look at the trans i worked out it must be on the selector. Cheers for the tip off about tripping the inhibitor - I would have been cursing haha "the bastard... it wont even turn over"!!
L series wagon EA82T (RIP)
'92 Liberty RS Turbo
GU Patrol Ute
Honda XR400R

Post Reply

Return to “Conversions, Modifications and Performance Upgrades”