It lives

stamp_licker · Post by **stamp_licker** » Tue Nov 07, 2006 7:53 pm

yeah i wanted to add the scoop for wank factor.Planned on painting a nice STI emblem on the tranny cooler,so when you peeked thru the scoop hehe.At the moment its zip tired to the condenser,but i've stuffed up again .The cooler i've been hourding for years has 8mm fittings the scooby do auto has 10mm.
IDEAS ANYONE?

Suby Wan Kenobi · Post by **Suby Wan Kenobi** » Tue Nov 07, 2006 8:37 pm

Its only a cooler/ heater in the radiator end tanks the capillary size is very small so you will not have any issues running the smaller tubes size.

vincentvega · Post by **vincentvega** » Tue Nov 07, 2006 8:44 pm

Mate if you like the idea of a scoop do it. Its your car! Personally i like the sleeper thing

With the cooler - have you still got your EA Auto radiator in the car? Are you going to hook up the auto cooler / heater in the radiator end tank? I have always been told to keep the radiator hooked up as it warms the auto box up to operating temp sooner, but add the trans cooler aswell to keep temps down when working hard

stamp_licker · Post by **stamp_licker** » Wed Nov 08, 2006 10:17 pm

Sleeper it is.coolers in and connected.I didn't run it thru the rad tank,but i see your point.The tcu holds gears longer when the tranny is cool.At the moment i have no gears ,it just changes idle settings when going thru the gears but no drive.Tomorrows job.