The edge of the tray, where the tailgate hinges bolt up, has been cut away and a large heavy square tube has been put in place. The tube is flanged and bolts into chassis rails, along with tow bar. It is a neat job, but I am unsure how it will be looked upon when I try to get a blue slip.
I have added two angles to the top to facilitate tailgate hinge fitment. The tailgate, which came with but was not fitted to Rats Nest, now works as it should.
With a view to making rear end look roadworthy, I have sourced a rear bar from Isuzu D Max. With a little modification it should fit nicely and hopefully pass blue slip inspection.
A few pics of mock-up. A little trimming here and there and she’ll be sweet, with stock corner bumpers helping to make it look factory.
![Image](https://i.ibb.co/nPBjrYG/E5-E5-E95-E-CAD4-4-B50-ACB1-6893-A2-AE1302.jpg)
https://ibb.co/9ZhWn1D
https://ibb.co/ZTgmnxm
![Image](https://i.ibb.co/zf2JyZJ/8-F142-CC5-8295-4-F37-9213-8-E40-EF580936.jpg)