FS: Subaru Omega/Leone RXii Coupe/Hatch

RSR 555 · Post by **RSR 555** » Thu Apr 05, 2018 11:20 pm

Item............................... Extremely Rare - 1986 Subaru Leone RXii Coupe

Description...................... Factory fitted EA82T (EFI with Turbo) engine. 5 speed Fulltime AWD gearbox (Lockable Centre Diff). Plated LSD rear diff. 4 wheel disc brakes. 15" SSR rims. All the stock RX refinements.

Condition........................... Very clean interior. Small spots of rust around front windscreen (easy repair).

Location .......................... Rockingham, Western Australia

Price................................ $7,000 ono

Contact ............................ SMS me (Paul) on Zero 4 Two 1 Three 1 Four 3 Five 0 or email wrc22b at gmail dot com

Subyroo · Post by **Subyroo** » Fri Apr 06, 2018 12:26 pm

Geez! That would almost be a collectors item Paul.
It's the first time that I have ever seen one.

Post by **TOONGA** » Sat Apr 07, 2018 10:37 am

Might get more traffic if you put this on gumtree

TOONGA

RSR 555 · Post by **RSR 555** » Sat Apr 07, 2018 10:40 am

Hi Peter, yeah not too many of them around. I only know of 2 others here in Aus. Sad to let it go but selling off almost all my stuff.

RSR 555 · Post by **RSR 555** » Sat Apr 07, 2018 10:49 am

Thanks TOONGA, it is going up on gumtree later, just thought I'd offer it first to the Subaru group.

Nubaru · Post by **Nubaru** » Sat Apr 28, 2018 9:56 pm

Is that it or a file photo lifted from the internet ?

Very nice detail but out of my budget.

Is it RHD?

RSR 555 · Post by **RSR 555** » Mon Apr 30, 2018 11:42 am

Nubaru wrote:Is that it or a file photo lifted from the internet ?

Yes, this picture is of the actual car. I have more if anyone is interested in purchasing it.

Nubaru wrote:Very nice detail but out of my budget.

She is an awesome car and one I didn't think I'd ever sell but times are changing and 95% of my cars are going to be sold off.

Nubaru wrote:Is it RHD?

Yep, RHD from factory

wagonist · Post by **wagonist** » Fri May 18, 2018 11:51 pm

drool...

RSR 555 · Post by **RSR 555** » Sun May 20, 2018 10:15 am

wagonist wrote:
drool...

She would nice with an EJ20T conversion

wagonist · Post by **wagonist** » Sat Jun 02, 2018 11:44 pm

I wonder though if an EJ conversion would "ruin" it? In the US with more of them, not so much, but rare here. Was toying buying the wrecked one in Adelaide, but I've got too many projects

, and now a kid (though he's almost at the age of climbing into the seat himself...)

RSR 555 · Post by **RSR 555** » Sun Jun 03, 2018 12:17 pm

The good thing about the EJ20T conversion in the L.Series models, is there is no chassis mods required, so you could always keep the original motor setup for reversal (if anyone ever felt the need) but I'd be supremely surprised if anyone even noticed the difference.

I too have way too many projects and time is getting shorter and shorter, so pretty much all of my collection is being sold off.

wagonist · Post by **wagonist** » Wed Jun 20, 2018 11:32 pm

biggest issues are the hydraulic clutch and getting the shifter to work. The EJ converted RX turbo I bought 15 years ago need the trans tunnel cut out a bit for the shifter linkage to fit through, put a gaping hole put in the firewall to mount up the clutch setup. It was done really poorly and was a heavy mother.
I have toyed with the idea of using the original clutch cable to pull on a pivot, which then pushes on a remote mounted clutch master somewhere else in the engine bay (prob rear left corner where the clutch cable would reach without being modified). then it's really reversible.

RSR 555 · Post by **RSR 555** » Thu Jun 21, 2018 7:57 am

Oh.. seems odd. I have not had to modify any L.Series tunnels on any of the EJ conversions I've done. I wonder what they were doing that was different?

With the clutch setup, I've been able to use the push clutches from the later wrx models.

wagonist · Post by **wagonist** » Fri Jun 22, 2018 11:10 pm

which gearstick did you use? This one had the WRX stick and a shortened linkage.

Any pics of hydro clutch setup?

RSR 555 · Post by **RSR 555** » Sun Jun 24, 2018 8:25 pm

I use the EA shifter and just weld up the bottom stay off the EJ box on to the EA one. The top EA selector rod connects straight up to the EJ box.

Hydro setup? Never used a water one... hahahaha.. jokes but sorry no pics of any hydraulic ones, as I've kept the cable setup and use the later model EJ25T push clutch setup, not the early EJ20T pull clutches

Post by **TOONGA** » Sun Jul 01, 2018 10:25 am

Gumtree ad for the 1986 Subaru Leone RXii Coupe

https://www.gumtree.com.au/s-ad/rocking ... 1188048477

TOONGA

RSR 555 · Post by **RSR 555** » Sun Jul 01, 2018 10:01 pm

Thanks Jules

RSR 555 · Post by **RSR 555** » Thu Jul 05, 2018 10:07 pm

Deposit received. Will delete ad once fully paid for.

RSR 555 · Post by **RSR 555** » Thu Aug 02, 2018 7:46 pm

With much sorrow, the car is sold

wagonist · Post by **wagonist** » Tue Sep 18, 2018 11:31 pm

Thanks for the info about the clutch.

I hope the car went to a good home. Will we see it again on here?

The AUSubaru.com.au Forums

FS: Subaru Omega/Leone RXii Coupe/Hatch

SOLD: Subaru Omega/Leone RXii Coupe/Hatch

Re: FS: Subaru Omega/Leone RXii Coupe/Hatch