WTB EA81 dual belt pulleys

Venom · Post by **Venom** » Wed Jul 03, 2013 9:25 am

Edit: Actually just after a double or triple belt alternator pulley for an EA81.

PM me if you have anything.

steptoe · Post by **steptoe** » Wed Jul 03, 2013 1:52 pm

i think the dual crank pulley is actually a triple , say you'll be happy with a triple as well;

Silverbullet · Post by **Silverbullet** » Wed Jul 03, 2013 6:34 pm

I've got two, you can have one of mine. One came with my new engine, and another came with an incomplete p/steering lot I bought. No idea what it's worth, shoot me a PM if you're interested.

*Edit* Just re-read "alternator pulley" Do you mean the pulley that is on the alternator? I had no idea there were multi-ribbed versions. I was talking about crank pulleys.

Venom · Post by **Venom** » Wed Jul 03, 2013 7:01 pm

Silverbullet wrote:I've got two, you can have one of mine. One came with my new engine, and another came with an incomplete p/steering lot I bought. No idea what it's worth, shoot me a PM if you're interested.

*Edit* Just re-read "alternator pulley" Do you mean the pulley that is on the alternator? I had no idea there were multi-ribbed versions. I was talking about crank pulleys.

I'm pretty sure the cars with A/C have a multi belt pulley for the alternator.

Post by **TOONGA** » Wed Jul 03, 2013 7:54 pm

Get an ea82 alternator from an "L" with an aircon setup.

TOONGA

steptoe · Post by **steptoe** » Thu Jul 04, 2013 8:08 am

Hmm, do EA82 crank pulleys fit EA81's ?? They are bigger diameter pulley, pretty sure of that much. Just for info...I have had a few EA82 with AC.... PS pulley has two grooves, only one ever had a twin groove alternator and that was an 89 mpfi touring wagon, so n ot all AC EA82's had 'em

555Ron · Post by **555Ron** » Thu Jul 04, 2013 9:14 am

I'm pretty sure there is no such thing as a double pulley for the alternator. The EA81T has a double pulley for the water pump. The crank pulley needs upgrading to install the a/c setup. Everything else will just bolt on to the block...

steptoe · Post by **steptoe** » Thu Jul 04, 2013 10:13 am

You may rephrase that so not to get shot down

You are referring to EA81T Rhys ?

YouTube · Post by **El_Freddo** » Thu Jul 04, 2013 10:56 am

Hmmm.

I know the crank pulley is a triple pulley, but I've not known the EA81s to run a double on the alternator itself.

If your after the crank pulley I've got one you can have, especially if I can have your single pulley in exchange to keep the engine sealed up

What is it that you're up to - installing AC?

If it is an alternator pulley I should have one of them on an L series alternator somewhere...

Cheers

Bennie

steptoe · Post by **steptoe** » Fri Jul 05, 2013 8:07 am

555Ron wrote:I'm pretty sure there is no such thing as a double pulley for the alternator. The EA81T has a double pulley for the water pump. The crank pulley needs upgrading to install the a/c setup. Everything else will just bolt on to the block...

Teacher working too hard ?

steptoe · Post by **steptoe** » Fri Jul 05, 2013 8:07 am

El_Freddo wrote:Hmmm.

I know the crank pulley is a triple pulley, but I've not known the EA81s to run a double on the alternator itself.

If your after the crank pulley I've got one you can have, especially if I can have your single pulley in exchange to keep the engine sealed up

What is it that you're up to - installing AC?

If it is an alternator pulley I should have one of them on an L series alternator somewhere...

Cheers

Bennie

Teacher working too hard?

Post by **TOONGA** » Fri Jul 05, 2013 6:19 pm

Ford make one

http://www.ebay.com.au/itm/Ford-ALTERNA ... 35bb44bdf9

TOONGA