Want a custom bar work front bumper l series.

Mitchhsj · Post by **Mitchhsj** » Thu Jun 28, 2012 9:37 pm

Hi all I want to design and make a custom front bar replacing the stock one on my l series ( bar work). Similar to like a potrol comp truck but more quiet / suttle and les fagy. Want it to shorten up the noise by around 6 inches and continue into a custom bash plate to keep the sand out. It will have a 4 inch lift to match and I have already made a custom rear bumper and spare tire gate to match. Wondering If anyone has seen anything similar or links? Photos for some ideas.
Thanks guys

guyph_01 · Post by **guyph_01** » Fri Jun 29, 2012 12:25 am

Taken around on the web.

This below would be great to stick a winch in the middle...

And below, my favorite

Put some pics of your rear bar up:)

AshR · Post by **AshR** » Fri Jun 29, 2012 9:29 am

I love the last one, who wants to make me one for my brumby?

purp · Post by **purp** » Fri Jun 29, 2012 9:53 am

AshR wrote:I love the last one, who wants to make me one for my brumby?

Another +1 for the last one. Excellent approach angle increase at the corners!

guyph_01 · Post by **guyph_01** » Fri Jun 29, 2012 10:36 am

Id combine the sedan one and the last one and stick a winch on it:) Maybe the next thing i do on my car:p

Mitchhsj · Post by **Mitchhsj** » Fri Jun 29, 2012 5:53 pm

Wow that's just what I needed thanks mate huge help!!!

Mitchhsj · Post by **Mitchhsj** » Fri Jun 29, 2012 6:02 pm

I'm making one just like the last, I agree it's looks great. That's one of the problems wi th these things over hang front and back in holes and hills. I've sorted out the back with a custom rear bar that started as 100mm C Chanel it sigh higher than stock and I shortened the pipe so it didn't become part of the earth when backing up a hill.... Even with a 3 inch and 27s will have new lift kit in the new wagon with the bumpers on soon. Thinking of a new paint job. Will post heaps of pics when I start!!

guyph_01 · Post by **guyph_01** » Fri Jun 29, 2012 8:53 pm

Make me one.... Seriously...

AshR · Post by **AshR** » Mon Jul 02, 2012 10:29 am

Yeah once you have yours sorted, I'd be pretty keen to get one (I may have to replace the bumper on the brumby for RWC, so a front bar would fix that issue

)

alx92 · Post by **alx92** » Mon Jul 02, 2012 5:17 pm

that first pic, quad headlamps on an L???? brumby lights???? coz that pretty cool...
any kickin round here done up some rock sliders on the L? im thinking of trying it out...

Mitchhsj · Post by **Mitchhsj** » Thu Sep 13, 2012 10:04 pm

The time has come to build this front end, the 3rd one down is the one I want do you have any ome pics of it? I can't seem to fine any, really keen to get some..

YouTube · Post by **El_Freddo** » Mon Sep 17, 2012 8:45 pm

alx92 wrote:that first pic, quad headlamps on an L???? brumby lights???? coz that pretty cool...
any kickin round here done up some rock sliders on the L? im thinking of trying it out...

Not brumby lights, specific L series units from the US on the povo pack DL's, at least the early ones anyway.
There is one set in Aust that I know of - Guyph's touring wagon. Looks Back to the Future to me and it's something I'd consider as the high beam globes could be upgraded massively as they're off with the low beam

Some will say they're shit, but I reckon they're jealous.

Mitchsj, I can post some pics of my rear bar set up, it's rough, crude but effective and gets the job done. I need to work on a new set of hinge pins as they're a little small for the job

Cheers

Bennie

guyph_01 · Post by **guyph_01** » Tue Sep 18, 2012 12:50 am

El_Freddo wrote: There is one set in Aust that I know of - Guyph's touring wagon. Looks Back to the Future to me and it's something I'd consider as the high beam globes could be upgraded massively as they're off with the low beam Some will say they're shit, but I reckon they're jealous.

Bennie

MWAHAHAHAHAHAHAHAHAHA

Post by **Alex** » Tue Sep 18, 2012 8:38 am

El_Freddo wrote:Some will say they're shit, but I reckon they're jealous.

They're fugly yes.

Downgrade imho. Makes the car look 10 years older than it really is.

Sent from my HTC Velocity 4G using Tapatalk 2

purp · Post by **purp** » Tue Sep 18, 2012 3:00 pm

On the topic of custom bar work...

What sort of material do people use? Obviously most homemade stuff is largely round steel tube. But what sort of wall thickness is it? Where can you get it from? What is it normally used for? etc etc...

Not thinking this is something I am going to tackle all that soon, but I would like to have a whack one day.

Post by **Bantum** » Tue Sep 18, 2012 5:24 pm

Here is a MY original by Scorpion :

Only pics I have sorry ...

And on MY brumby :

Not sure who made this one ...

Post by **Bantum** » Tue Sep 18, 2012 5:36 pm

purp wrote: On the topic of custom bar work...

What sort of material do people use? Obviously most homemade stuff is largely round steel tube. But what sort of wall thickness is it? Where can you get it from? What is it normally used for? etc etc ...

Depends on what you want to do with it ...

If it's just for show, go with alluminum ( weight saving ) however, if you want strength, go for stuff that is redily available ( eg: fencing pipe ) & has a 2 to 3 mm wall thickness - any thicker & it will become rather heavy.

You can also make it lighter by removing any unesscary bits + drill some well placed holes / slots ( for ventilation ) ...

Mitchhsj · Post by **Mitchhsj** » Wed Sep 19, 2012 7:01 pm

thanks mate i already have my rear bar done. just finished my roof basket i have just made as i need it for camping, its only a little one, 880 wide and 1100 long so i can keep it on all the time. got it to sit real low to the roof to keep it neat, i love the look of the 4 spot lights across the front of the basket.. i just painted it today at work so i should have a photo of it before the weekend.. and I'm starting my bar work this week for my front end... i will most likely use 2inch steam pipe [steal] i have it all in my head how i will make it. just have to get stuck into it.. here is a pic of my rear number and swing away i made..

purp · Post by **purp** » Wed Sep 19, 2012 7:13 pm

Mitchhsj wrote:here is a pic of my rear number and swing away i made..

Very noice.

Cliff R · Post by **Cliff R** » Wed Sep 19, 2012 7:38 pm

Great bull bar info.
I like the wording on the first picture though
Ill get you.. and your little Prius too

Barhhhaaaa

Sorry

The AUSubaru.com.au Forums

Want a custom bar work front bumper l series.

Want a custom bar work front bumper l series.

Original Kit ...

Materials ...