Bianca Body Work

Brumby91 · Post by **Brumby91** » Sat Dec 10, 2011 12:13 pm

Brumby Kid wrote:Why do we name our cars?

Generally because they are like females... Because.....
" If it's got Tit's or Wheels... It's gonna give you trouble!"
Bwha ha ha ha

Brumby Kid · Post by **Brumby Kid** » Sat Dec 10, 2011 1:44 pm

Brumby91 wrote:Generally because they are like females... Because.....
" If it's got Tit's or Wheels... It's gonna give you trouble!"
Bwha ha ha ha

Bahahaha, that is the funniest thing ive heard for ages. Im still laughing.
True, you don't often see too many cars with a male name do you?

Brumby Kid · Post by **Brumby Kid** » Tue May 15, 2012 8:35 pm

Soo far behind right now.
So where were we.
Will finish the right up on the tailgate later.
Interior.....

stripped her out.

Painted this on for sound deadening.

Then the felt, i just bought a roll from a bulk carpet store.

Cheers Cam

Brumby Kid · Post by **Brumby Kid** » Tue May 15, 2012 8:36 pm

And some More

Also have felt on the doors, its almost all back together. Mainly spending time on the engine bay brfore i get my engine back.

Cheers Cam

AshR · Post by **AshR** » Tue May 15, 2012 9:06 pm

loving the sound deadening. I think my project might be up for that (possibly need new seats for RWC, haven't got the brumby yet) but if I'm pulling the seats out, may as well replace carpet and put sound deaden under it.

Great pics of a "what to expect"

Brumby Kid · Post by **Brumby Kid** » Tue May 15, 2012 9:11 pm

Thanks mate,
Yeah mine are kinda stuffed, springs, foam and vinyl.
Dont think you need it for roadworthy.
Will get mine done one day after ive paid for the engine.

Silverbullet · Post by **Silverbullet** » Tue May 15, 2012 10:09 pm

Looking good Cam, let us know how that sound deadener performs if you get your car driving before mine (after I take mine off the road that is

) I'll be using the foam/foil backed stick on variety, will be interesting to compare.

Brumby Kid · Post by **Brumby Kid** » Tue May 15, 2012 10:22 pm

Yeah will do.
Like dynamat?
I think you can get something like that from clark rubber.
Looking forward to your next set of mods Sam.
What else are you planning?

Cheers Cam

Silverbullet · Post by **Silverbullet** » Wed May 16, 2012 6:53 pm

Yeah like Dynamat, I think it will be better for the wagon insides.
Most of my big ideas are in my sig

Well, they're the definites anyway. Anything else is a maybe at this point but I'll definitely have the L 5 speed, 2 inch lift, bullbar and rear swing-out tyre carrier.

But as I say, all ideas at this stage

YouTube · Post by **El_Freddo** » Thu May 17, 2012 1:08 am

That paint on sound deadener goes well. I've used it on Ruby Scoo - I'm looking at doing her underside too but can't get her to stand still for long enough!

My Brother has used it in his truck including under the cab - he now swears by it and will be putting another layer or two on to see if he can reduce the cab noise even further.

I think you'll be happy with the results. The issue I have now is sorting out the wind noise

Cheers

Bennie

Brumby Kid · Post by **Brumby Kid** » Wed Aug 29, 2012 8:40 pm

Well my engine is just about complete so I've been busy working on the engine bay.
The interior is finished bar the seats. (one day)
And the back end is now road worthy, though it will come off again for a better clean, cut and polish once the car is running.

Front half all painted up. I used VHT engine enamel gloss white.

Brumby Kid · Post by **Brumby Kid** » Wed Aug 29, 2012 8:42 pm

And the back half I will start tomorrow night.

Cam

YouTube · Post by **El_Freddo** » Wed Aug 29, 2012 8:50 pm

Nice work mate! If you were closer I'd offer you the rotisserie if you wanted to give it a go... You could leave the interior in a brumby and it'd be fine!

Keep up the awesome work - you'll have one VERY neat brumby once it's done!

Cheers

Bennie

Brumby Kid · Post by **Brumby Kid** » Wed Aug 29, 2012 9:26 pm

El_Freddo wrote:Nice work mate! If you were closer I'd offer you the rotisserie if you wanted to give it a go... You could leave the interior in a brumby and it'd be fine!

Keep up the awesome work - you'll have one VERY neat brumby once it's done!

Cheers

Bennie

Thank you Bennie.
Its comments like these that really make it worth it.
I would love to use a rotisserie but yes there is a few k's between us.

Cam

murta123 · Post by **murta123** » Mon Oct 22, 2012 6:46 pm

Hey mate just wondered were the 12 volt Power outlet is located in the tray. Have u seen anyone who has done reverse/rear lights and is there anyone who has put led bulbs in the tail lights
Love your work on the paint as well

Brumby Kid · Post by **Brumby Kid** » Mon Oct 22, 2012 7:30 pm

Thank you! And welcom to the forum. It's always nice to hear feedback.
The 12 volt outlet is located on the removable panel above the drivers wheel well.
There are reverse lights already there. Along with the brake lights and indicators.
Don't know of anyone using led's but I'm sure it can be done.

Cheers Can

murta123 · Post by **murta123** » Mon Oct 22, 2012 7:50 pm

Oh yeah nice that's wat I'm thinking of doing. Yeah I know but I was just thinking for 4wding or for camping.
Thanks Glenn

Brumby Kid · Post by **Brumby Kid** » Mon Oct 22, 2012 8:40 pm

Oh like extra "campsite" lights pointing out the back. Sorry.
Easy to do though.

Cheers Cam

murta123 · Post by **murta123** » Tue Oct 23, 2012 5:57 pm

Yeah that's it mate. How much did your sound deadener cost I'm thinking about doing the same

Brumby Kid · Post by **Brumby Kid** » Tue Oct 23, 2012 6:11 pm

The container of goo was about $50 I think.
And the felt was about $20 or there abouts I think.
As of tonight I can vouch for how well it works for speakers. Sadly haven't tested it for road noise. (Drive it in the shed! See other thread later tonight)
Makes the speakers sound great!

Cheers Cam

The AUSubaru.com.au Forums

Bianca Body Work

Update

Update

More Pics