Show us yer brake hose clamps please

steptoe · Post by **steptoe** » Sun May 13, 2012 10:55 am

It's time I bought instead of borrowed, doubting the old fashioned metal ones no longer available, what do others have /use/prefer ???

Pics are good, or links

Have just bled my brakes after a strut replacement to find I empied the reservoirr now need to disconnect, remove, bench bleed when i find my bleeder pipes I made for master cylinder bench bleeding...... leads to whole shed clean out

RSR 555 · Post by **RSR 555** » Sun May 13, 2012 11:53 am

If I need them (which I think I have only about 1/2 dozen times) I have a set like this...

If it's a once off job, then just use a set of long nose vice grips with some hose over the ends

thunder039 · Post by **thunder039** » Sun May 13, 2012 12:38 pm

^same set i use

littlewhiteute · Post by **littlewhiteute** » Sun May 13, 2012 7:30 pm

I have similar to this:

http://www.ebay.com.au/itm/3-Piece-Flex ... 480wt_1141