who can pull their drivetrain out without liftin the car...

bluesteel · Post by **bluesteel** » Sat Oct 22, 2005 8:26 pm

I CAN

engine, gearbox, driveshafts, talshaft and diff all without jacking it up or going up wheel ramps

tim_81coupe · Post by **tim_81coupe** » Sat Oct 22, 2005 9:56 pm

Yeah me too

I only jack my wagon up to work on brakes / suspension.

The coupe is the opposite - I have to jack it up to remove the diff, exhaust or even the tailshaft. And the worst is if I want to remove the engine & gearbox, I actually have to undo the crossmember & suspension and lift the car back over the drivetrain!

aspro · Post by **aspro** » Sat Oct 22, 2005 10:17 pm

pair of clever bastards!.... i could if i drove over a deep enough ditch. but i guess that would be cheating.

Phizinza · Post by **Phizinza** » Sun Oct 23, 2005 1:15 am

I can't. When I put my engine back in a few nights ago I somehow popped one of my inner CV's out of its socket while jacking the gearbox. So I had to take the wheel off and axle out to put a engine in.

But I think to take it out I'd need to jack my 2" lifted rig up a little, just dont see every thing coming out the bottom