My Touring Wagon EJ25 build, Part 2
Got them at $21 each. But pretty sure you can get them cheaper if you have an account or know someone:)
Ohhh yeah, also changed all the fuel lines to new ones:)
No way, they are the best:DAlex wrote:All good except for the oldschool lights. Ditch em.
Ohhh yeah, also changed all the fuel lines to new ones:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
And they match even more the roof lights now:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Those are not the lights from the quad brumby, They are the specific JDM light made for the L series. It just bolted on as all the holes are already there.
See pics as posted by dobo
showthread.php?t=20141&page=2
See pics as posted by dobo
showthread.php?t=20141&page=2
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
bahhh, you don't know what your talking about alex!!!!
Yep got them from the us. Took 4-5moths of searching, about 30 pm's, 15 email's, was about to give up but then a guy pm'd me out of no where:)
Yep got them from the us. Took 4-5moths of searching, about 30 pm's, 15 email's, was about to give up but then a guy pm'd me out of no where:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
- d_generate
- General Member
- Posts: 1529
- Joined: Sat Feb 16, 2008 1:51 am
- Location: Back in Perth and SORing it atm.
US lights are highly illegal over here, they point in the wrong direction so be aware of Mr Plod at night when you blind him on low beam.
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M
http://www.youtube.com/watch?v=TKrsF-2JS3M
Hummmm, the globes and headlight were bought in AUS:) I'll compare with the brumby if they light up the same direction when i wire them up:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
- El_Freddo
- Master Member
- Posts: 12511
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Bridgewater Vic
- Contact:
This may be true for late model vehicles but I'm sure with this headlight setup a couple of screws can be tweaked and you're all good.d_generate wrote:US lights are highly illegal over here, they point in the wrong direction so be aware of Mr Plod at night when you blind him on low beam.
Maybe someone's just a little jealous! i don't think Mr Plod will give two hoots about these lights - the roof ones would probably catch is attention first!
Cheers
Bennie
Ok so 2day i got my new clutch:) So i got the gearbox out and installed it. Wish Pauls was still here so i could use his car hoist:p Lol.
Anyway here are some pics:)
LOL
Anyway here are some pics:)
LOL
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
He was being deadly serious - LHD cars have the headlights focused to the right away from oncoming drivers. So if these are for a LHD car then yes the lens will focus the light into oncoming drivers eyes.TOONGA wrote:not sure if "D" was being serious, unless they point the wrong way
upside-down perhaps ?
TOONGA
In Europe, if you go over from the UK you have put black tape over part of your headlight to stop this happening.
But if they are from a JDM then you will be OK since they are RHD.
The benefits of having a lifted car - no need for unsafe umbrella standsguyph_01 wrote:
LOL
[SIGPIC][/SIGPIC]
Head lights are from OZ, Brezells i think they are called 'brackets' that hold the headlights are from the Us. But they are fully adjustable like on the quad brumby via screws. So i'll get that pointing towards the right direction:)
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
- El_Freddo
- Master Member
- Posts: 12511
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Bridgewater Vic
- Contact:
Clutch industries - same mob I got mine from, but it wasn't that colour on the pressure plate; did you go with a HD clutch? Mine seems to feel better, I think I just needed to get used to it again except I still need to adjust the pivot ball out Make sure you do this bit correctly Guyph to get the best adjustment possible.guyph_01 wrote:
And the Headlight saga. I think this is dead now - we've noted that Guyph can adjust the direction of the beam to what a RHD car requires and he's using Australian sources lenses etc. So I'm not seeing what the big deal is. I will put it out there that I like the look of them too.
I'm keen to see the rest of this lift now Guyph, get cracking!!
Cheers
Bennie
What is that????:sEl_Freddo wrote: I think I just needed to get used to it again except I still need to adjust the pivot ball out Make sure you do this bit correctly Guyph to get the best adjustment possible.
Yeah its a HD kit but its from a 2.5 outback to match my engine and my driving style:D LOL
On the plus side, i didn't have to paint it:mrgreen:
See Alex, if bennie likes them and wants them, It means i done good:)El_Freddo wrote: I will put it out there that I like the look of them too.
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
didn't do much 2day as i had a few assignments to finish for uni.., minor things like adding coolant, P/S fluid and finalizing the interior. Here is what it will look like. Only thing to do is get Dave to hook up all the wiring:)
Tomorrow i'll be installing a clutch, T-Belt, Wpump, seals etc on a Little 3cyl Swift:p
then Monday i'll hopefully get the rear part of the lift-kit from the powder coater. Hopefully i can install it and them send the car to the exhaust shop during the week. And hopefully Dave can work him magic next weekend and finally get this engine started:D
Tomorrow i'll be installing a clutch, T-Belt, Wpump, seals etc on a Little 3cyl Swift:p
then Monday i'll hopefully get the rear part of the lift-kit from the powder coater. Hopefully i can install it and them send the car to the exhaust shop during the week. And hopefully Dave can work him magic next weekend and finally get this engine started:D
The project, EJ22 --->>> EJ25 Quad CAM:D touring wagon
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
Thinking of going on holidays on a little paradise island, Check out http://www.dodolidays.com
- d_generate
- General Member
- Posts: 1529
- Joined: Sat Feb 16, 2008 1:51 am
- Location: Back in Perth and SORing it atm.
I'd love to see the lights, could someone host a pic on Photo Bucket for me, that shitty Image-shack is useless in Asia
98 Libbo with V3 STI running gear. 13.0 @ 105mph with CAI & 3" Zorst:mrgreen:
http://www.youtube.com/watch?v=TKrsF-2JS3M
http://www.youtube.com/watch?v=TKrsF-2JS3M