Anyone here on Rexnet? Need a favour!

ScubyRoo · Post by **ScubyRoo** » Tue Feb 01, 2011 8:59 am

Hey folks

There's some gearbox parts i'm chasing on rexnet and my registration is taking ages (2 days already) to be approved, so I can't contact the seller. Is there someone on here who could help me out?

The thread is:
http://www.rexnet.com.au/forum/index.ph ... gearboxes/

If you could please PM the seller with my email (owenfidler @ gmail dot com) and explain why I couldn't do so, and ask him to contact me asap that would be great.

Much appreciated!
Owen.

RSR 555 · Post by **RSR 555** » Tue Feb 01, 2011 12:58 pm

PM sent on your behalf

ScubyRoo · Post by **ScubyRoo** » Tue Feb 01, 2011 2:34 pm

Thanks mate!

My account was activated just now, typical eh?!

Thanks again, Owen.

YouTube · Post by **El_Freddo** » Thu Feb 03, 2011 8:27 pm

What ratio is this ring and pinion gear? I'd check what you're running now before you dive into buying another ratio. What I'm getting at is that your gearbox and rear diff may already be the ratio you're looking at from this seller - just don't want you to be buying the same thing when you don't need it unless you're building a side gearbox for a future gearbox setup...

Cheers

Bennie

ScubyRoo · Post by **ScubyRoo** » Fri Feb 04, 2011 7:36 am

El_Freddo wrote:What ratio is this ring and pinion gear?

4.11

El_Freddo wrote:unless you're building a side gearbox for a future gearbox setup...

Muahahahahaha. Good bye shitty 3.7, this winter I will have muddies and accelleration please

Thanks for your concern though Bennie, muchly appreciated

Cheers,
Owen.

YouTube · Post by **El_Freddo** » Fri Feb 04, 2011 11:54 pm

Yeah mate, I couldn't remember the ratio you were looking for with the rear diff replacement hence the question.

It'll be a good move I reckon, keep us posted as to how you go with the gearbox and how much you end up paying for the parts

Cheers

Bennie