Brumby engine replacement.

drkevorkian · Post by **drkevorkian** » Tue Apr 18, 2006 9:54 pm

The situation is... rolled my '91 brumby and have found an '85 model with a stuffed engine. I want to put my engine in the '85.

Is there going to be any major differences between the engine setup/mounting between these year models? Im hoping for a simple swap over.

Easy?

BaronVonChickenPants · Post by **BaronVonChickenPants** » Tue Apr 18, 2006 10:02 pm

It's likely there'll be different emissions crap, possibly different wiring as well, but all in all should be an easy swap.

Jordan

AndrewT · Post by **AndrewT** » Tue Apr 18, 2006 10:02 pm

I think there will be some slight wiring differences but I beleive the actual mounting will be a straight unbolt/bolt situation.

Overall should be easy, nothing a couple of questions and answers on Ausubaru won't solve when you're in the thick of it.

steptoe · Post by **steptoe** » Tue Apr 18, 2006 10:29 pm

I believe it takes a trained eye to pick the differences between the two years other than headlights and oil dip stick, front brake callipers and clutch size

go for it

drkevorkian · Post by **drkevorkian** » Wed Apr 19, 2006 7:17 am

yeehaa!. off i go to pick up my wreck!

Thanks for the help.