240V via inverter as bitey as 240V socket?
- steptoe
- Master Member
- Posts: 11582
- Joined: Thu Oct 06, 2005 10:00 am
- Location: 14 miles outside Gotham City
240V via inverter as bitey as 240V socket?
Just thinking about inverters used in car for 240V power (wanna feed a water pump) typical 150W rated, do they require same respect as far as safety and electrocution and installation as home based 240V 10A power?
- phillatdarwin
- Junior Member
- Posts: 532
- Joined: Thu Dec 25, 2008 6:11 pm
- Location: 93GL / 86rx ea82t Darwin NT
- Gannon
- Senior Member
- Posts: 4580
- Joined: Sat Nov 05, 2005 10:00 am
- Location: Bowraville, Mid Nth Coast, NSW
Sure do, 240v is 240v
Only difference is the mains is referenced to ground/earth, where an inverter has a floating ground, so if you only touch the active, and the inverter is not earthed, you may not get bitten.
What sort of pump are you planning on running with only 150w?
Only difference is the mains is referenced to ground/earth, where an inverter has a floating ground, so if you only touch the active, and the inverter is not earthed, you may not get bitten.
What sort of pump are you planning on running with only 150w?
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------
- AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
Ive got a 600watt 240v inverter in my liberty enough to run a printer and laptop mains while i am on the road..
If you are really concerned about getting a "shock" is to install earth wire to the ground from the inverter.
Cheers
AP
If you are really concerned about getting a "shock" is to install earth wire to the ground from the inverter.
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

- Mr Top Hat
- Junior Member
- Posts: 225
- Joined: Fri Mar 13, 2009 8:04 pm
- Location: wa scarborough
make sure you get a decent sized inverter for that pump atleast double (300w)
for the surge.
and go modified sinewave if you can coz it's cheaper and more efficiant.
if the pump doesn't run with modified you then have to hurt your wallet and get a pure sinewave.
for the surge.
and go modified sinewave if you can coz it's cheaper and more efficiant.
if the pump doesn't run with modified you then have to hurt your wallet and get a pure sinewave.
1990 L series wagon Ej22

i didn't realize this image was so large :-O

i didn't realize this image was so large :-O
- Gannon
- Senior Member
- Posts: 4580
- Joined: Sat Nov 05, 2005 10:00 am
- Location: Bowraville, Mid Nth Coast, NSW
Intercooler or water injection?
If you want a high pressure pump for water injection there are small high pressure (80 psi) diaphragm pumps on ebay for as little as $39
ebay.com.au/12V-80PSI-Diaphragm-Water-Pressure-Pump-High-PSI-Model
If you want a high pressure pump for water injection there are small high pressure (80 psi) diaphragm pumps on ebay for as little as $39
ebay.com.au/12V-80PSI-Diaphragm-Water-Pressure-Pump-High-PSI-Model
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------