Where to apply engine cleaner on EA82

someguy · Post by **someguy** » Fri Jul 30, 2010 10:27 pm

Hi All.

I am servicing the L tomorrow and am going to flush some Upper engine cleaner through it.

I have heard that on EFI engines it should be sprayed into the vacuum lines and on a carbed engine it should go directly down the barrel of the carb?

Is this true?

Mine is a Carbed EA82 so I would like to get it right so I don't waste $20 worth of cleaner :P

Thanks

Post by **TOONGA** » Sat Jul 31, 2010 9:41 am

the way I did it on my brumby was pull off a vacuum line that goes directly in to the manifold and put about 2/3rds into the manifold. then empty the remains of the can into the carby wait the prescribed time and start your engine and behold the cloud of leftover gunk that the exhaust emits until it is all burnt off

TOONGA

someguy · Post by **someguy** » Sat Jul 31, 2010 11:10 am

Thanks TOONGA

The subi is getting the luxoury treatment today:

* Penrite HPR 40 + Repco Filter
* Top Gun Premium Leads
* Champion Plugs
* Full wash/wax
* Upper Engine Cleaner
* Tyre blackner
* Dynamat (goes inside the doors and stops the speakers vibrating)

sven '2' · Post by **sven '2'** » Sat Jul 31, 2010 11:31 am

someguy wrote:Thanks TOONGA

The subi is getting the luxoury treatment today:

* Penrite HPR 40 + Repco Filter
* Top Gun Premium Leads
* Champion Plugs
* Full wash/wax
* Upper Engine Cleaner
* Tyre blackner
* Dynamat (goes inside the doors and stops the speakers vibrating)

Is like a day spa for a car.

Dynamat is one of the best upgrades to even the most basic ICE system

Enjoy the beers post admiring your work

Sven