Fitting a L series bullbar to a Brumby

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
Green_eyed_liberty
Junior Member
Posts: 374
Joined: Wed Oct 05, 2005 10:00 am
Location: Gold Coast

Fitting a L series bullbar to a Brumby

Post by Green_eyed_liberty » Sat Jul 03, 2010 12:27 pm

will a Bullbar for an L Series fit a brumby?

i've been told they dont fit, how far dont they fit?

could it be easy modified to fit? or will i need to sell it lol



cheers guys

User avatar
Subafury
Senior Member
Posts: 2985
Joined: Sun Apr 30, 2006 10:00 am
Location: Duncraig, WA

Post by Subafury » Sat Jul 03, 2010 12:40 pm

no. bugger it off it wont fit.different width chassis rails.
Image

User avatar
El_Freddo
Master Member
Posts: 12566
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:

Post by El_Freddo » Sat Jul 03, 2010 10:59 pm

^ what subafury said + the L series bullbar has the captive nuts on it where as the MY or brumby's "chassis rail" will have the captive nuts in it. The bullbars are a physically different in width as well, not by much but enough not to look the part...

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
stamp_licker
General Member
Posts: 1066
Joined: Wed Oct 05, 2005 10:00 am
Location: Kallangur.Bris North

Post by stamp_licker » Sun Jul 04, 2010 5:53 pm

I've made one that was fitted on a brumby fit my L .It's just a couple of bolt on brackets easy to fab. A reversal shouldn't be hard , L to brumby should be doable .
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D

User avatar
Wagonman
Junior Member
Posts: 267
Joined: Sat Oct 17, 2009 5:39 pm
Location: Yangebup WA

Post by Wagonman » Sun Jul 04, 2010 8:49 pm

I fitted a brumby bullbar to my L. Had to modify (hack the crap out of) it because it was too narrow so i would think an L series one IF you could get it to fit would look very out of place. good luck if you try though mate :)

User avatar
red_rocket
Junior Member
Posts: 233
Joined: Mon May 22, 2006 10:00 am
Location: perth, wa

Post by red_rocket » Sun Jul 04, 2010 10:55 pm

ill take the L bullbar if you dont use it...shipping will kill though
L series project
http://www.ausubaru.com/forum/showthread.php?t=14491
Rolling in the 99 Rex though :D

Post Reply

Return to “Subaru Chat”