Check out these Rims

Subiegirl · Post by **Subiegirl** » Thu Jun 24, 2010 8:30 am

Check out these Subie rims, nice and shiny, anyone got the $$$ for these beauties? haha

http://cgi.ebay.com.au/Subaru-BRUMBY-SP ... 1c138f0606

Post by **TOONGA** » Thu Jun 24, 2010 8:45 am

thats a sweet set of rims I would love to put them on PJ but Im pretty sure I would end up sleeping in PJ

and I would guess a lift kit or extreme bashing would be needed to fit them

TOONGA

spike · Post by **spike** » Thu Jun 24, 2010 9:14 am

somthign seems dodgy

sparling rims like that have to be custom made or modified and i just dont trust modied, unless i know the person who did it

ChPLAT · Post by **ChPLAT** » Thu Jun 24, 2010 9:42 am

May have been modified from a set of un drilled rims. Would def want a lot more details before buying them but for a bit extra Crossbred ftw

spike · Post by **spike** » Thu Jun 24, 2010 10:47 am

ChPLAT wrote:un drilled rims.

didnt think of that one
i was thinking just drilling used 1 point of referance or plating and drilling

d_generate · Post by **d_generate** » Sun Jun 27, 2010 2:48 am

Yuk, heavy cheap nasty looking chrome plated crap!!!!!!!!!!!!

Post by **TOONGA** » Sun Jun 27, 2010 11:23 am

ok I asked the questions on ebay about drilling and whell nuts that fit

the wheels were drilled by the manufacturer of the wheels (BSA Motorsports) and the standard wheel nuts will fit
thanks

so they were drilled from blanks and standard wheel nuts will fit

TOONGA

AlpineRaven · Post by **AlpineRaven** » Sun Jun 27, 2010 3:07 pm

ugh... horrible looking rims...
Cheers
AP

subybrumby · Post by **subybrumby** » Sun Jun 27, 2010 4:16 pm

Alpine Raven..great minds think alike..ditto

AndrewT · Post by **AndrewT** » Sun Jun 27, 2010 4:31 pm

eww they look like some kind of manufacturing defect has occured. Either that or a birth defect in the designer's brain.
But, of course it's all relative to people's individual taste. If you like them good luck to you

Gannon · Post by **Gannon** » Sun Jun 27, 2010 6:16 pm

Im more interested in the fact that there are blank wheels out there that can be drilled with the 4 x 140mm stud pattern

But im going 5 stud, so i wont be buying any

AndrewT · Post by **AndrewT** » Sun Jun 27, 2010 9:26 pm

yeh thats the way. If you are able to justify spending the money to buy brand new wheels then no doubt you could also afford to put in a Crossbred kit to upgrade to 5stud, and massively upgrade your brakes at the same time. Then you have your choice of heaps of rims without having to look for blank non-drilled ones.

red_rocket · Post by **red_rocket** » Sun Jun 27, 2010 11:59 pm

ewwww. wouldnt pay a cent.
but as previously said each to their own!!!