Gasket,Bearings and ring suppliers please

subybrumby · Post by **subybrumby** » Wed May 19, 2010 8:46 pm

Thanks fellas,

As the title says, looking for supplier of quality rings, bearings and full gasket kit for EJ22. Any recommendations for value and quality.???

RSR 555 · Post by **RSR 555** » Thu May 20, 2010 9:19 am

Hey Trevor.. do you have Veale Auto Parts over there? I use them over here for most parts (I have an account with them so it's cheaper for me) if you can't find anything over there, let me know and I'll get some prices from over here for ya

Cheers,
Paul

AlpineRaven · Post by **AlpineRaven** » Thu May 20, 2010 9:58 am

You could try bearing wholesalers ie. CBC or SKF etc..
Cheers
AP

subybrumby · Post by **subybrumby** » Thu May 20, 2010 6:13 pm

Thanks Paul, I might do that...Will be a little while yet.

wrxer · Post by **wrxer** » Thu May 20, 2010 8:34 pm

ebay usa. cheap full gasket kits. take few days to get here tho. you can get full kit from there cheaper than head gaskets alone here

RSR 555 · Post by **RSR 555** » Thu May 20, 2010 8:51 pm

subybrumby wrote:Thanks Paul, I might do that...Will be a little while yet.

No probs bud

subybrumby · Post by **subybrumby** » Fri May 21, 2010 1:04 pm

Thanx WRXER, I saw that...lot of stuff on there too. Was wondering though about quality.

wrxer · Post by **wrxer** » Fri May 21, 2010 11:04 pm

i got dohc 2.5 top overhaul kit and no issues, there is 2 different rocker covers for them, i got a kit that showed 2 different types of gaskets (4 in total). the spare ones fitted my wrx too. all fitted fine and seems ok. they have huge market there to keep costs down. you could but genuine head gaskets and ebay full kit if you concerned.
dunno bout pistons and bearings, im sure quality is ok but what if they wrong size or something.

YouTube · Post by **El_Freddo** » Tue May 25, 2010 11:42 am

When I rebuilt my EA I got the rings, bearings and seals from the place that did the bore work. It all came together well and ran like it should have...

Just makes sure the products are of a reputible brand.

Cheers

Bennie

coxy · Post by **coxy** » Sun Jun 13, 2010 7:58 pm

Good old Aussie company ACL make some nice Subaru bits these days top shelf Bearing sets,good pistons and the Total Seal gapless rings of US fame are actually made and designed by ACL and supplied under contract,that does suck though as they are shipped from here to the US then shipped back to Australia,same thing happens with the top notch Sonar systems in our Subs made in Sydney ,German company bought up the Aussie company and they get shipped to Germany then come back home at ten times the price,Globalism sucks.
Cheap parts are but a small saving on a rebuild when you factor everything in so remember pennywise poundfoolish as the Poms used to say.

steptoe · Post by **steptoe** » Sun Jun 13, 2010 10:57 pm

Huh? ACL ? I was told by parts dude that ACL went under with Mitsu Australia, however the ACL website says it is still trading sort of thing. Permaseal is another brand that aagaskets in melbourne supply to retailers. Site lists seals n gaskets numbers etc. Stating the EA82 HG is BN550 and is of graphite design. Time to email the ACL people to get some truth

1111giles · Post by **1111giles** » Mon Jun 14, 2010 2:58 am

subybrumby wrote:Thanx WRXER, I saw that...lot of stuff on there too. Was wondering though about quality.

Hi Trev,
I should be getting a full gasket set from westendengineparts.com via US ebay sometime this week.
Been very helpful so far and is also very reasonable.
Will let you know how it looks if u like?
They can do pistons rings bearings shells as well.
Cheers
Giles.
ps. update on shipping front cut due into me this week, will post up when info is with me.

subybrumby · Post by **subybrumby** » Mon Jun 14, 2010 12:11 pm

No worries Giles...Yes..looking to put together an EJ22 soon, its all in bits at the moment.

That would be great if you would let us know what you think of the USA parts you receive.

Thanx..Trevor