Hi brand new here and with Subies.
Just got a 02 Outback Limited 132K on the clock one owner Very Noice indeed better than old falcon it replaced.
Have been offered a near new ECB nudge bar with light brackets in between the bars. Can I fit this myself? Anyhing I need to watch for? Iam presuming it will bolt on ( are holes already there) or does it weld in place?
Cheers Tonz
Outback Nudge Bar
-
Gannon
- Senior Member
- Posts: 4580
- Joined: Sat Nov 05, 2005 10:00 am
- Location: Bowraville, Mid Nth Coast, NSW
Hi and welcome to AUSubaru forums.
I have an ECB nudgebar on my Outback.
It bolts onto the 2 metal brackets that sit just in front of the radiator, so there shouldnt be any welding required. Just be weary that there are 3 ABS sensors somewhere in the front. They have yellow trunking on the wires, be careful.
I have an ECB nudgebar on my Outback.
It bolts onto the 2 metal brackets that sit just in front of the radiator, so there shouldnt be any welding required. Just be weary that there are 3 ABS sensors somewhere in the front. They have yellow trunking on the wires, be careful.
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------