Step Buy Step ej to Brumby conversion Guide

Jason.Rheinberger · Post by **Jason.Rheinberger** » Mon Feb 08, 2010 3:34 pm

Sorry to bug every one with these new threads

But i just want to get every nthing right before i go and source all the nessisary parts

Has any one done a detailed step by step guide for a EJ22 or EJ20 Brumby conversion

Post by **TOONGA** » Mon Feb 08, 2010 3:45 pm

lol I just put a whole heap of links into your other thread and there is a pdf I can dig up as well

as well on http://offroadingsubarus.com/ej22swap_f ... ngine.html

Phizinza hjas a detailed account and the pdf link

http://offroadingsubarus.com/downloads/EA2EJ.pdf

and the search engine trolled up all of these

search.php?searchid=412446

LOL again

find me a job so I can stop doing this

TOONGA

Jason.Rheinberger · Post by **Jason.Rheinberger** » Mon Feb 08, 2010 3:57 pm

lol
you can put my engine in if you want

Post by **TOONGA** » Mon Feb 08, 2010 4:10 pm

ok bring it to WA and I will only charge you 25 dollars an hour thats 70 dollars an hour cheaper than most guys but expect it to take 5 weeks to get the bonnet off

and 20 weeks to get the engine out

should I keep going:)

sorry

TOONGA

Jason.Rheinberger · Post by **Jason.Rheinberger** » Mon Feb 08, 2010 4:14 pm

the brumby currently has an ea82t which runs fine but i don't know the history and i would just like one less thing to worry about going wrong (the turbo that is)
i wonder if any one would consider helping me put a new motor in in exchange for the ea82t?

Jason.Rheinberger · Post by **Jason.Rheinberger** » Mon Feb 08, 2010 4:15 pm

i think i might shop around toonga

Just incase i find a better $ rate lol

Post by **TOONGA** » Mon Feb 08, 2010 4:15 pm

well this is going to be an interesting thread to watch

and seriously if i was on that side of OZLAND I would help you do it

TOONGA

Jason.Rheinberger · Post by **Jason.Rheinberger** » Mon Feb 08, 2010 4:20 pm

maybe some one is willing to swap

Gannon · Post by **Gannon** » Mon Feb 08, 2010 5:03 pm

what part of nsw are you in?

Jason.Rheinberger · Post by **Jason.Rheinberger** » Mon Feb 08, 2010 6:04 pm

mudgee NSW

does any one know where i can get an ej22 or ej20 with ecu ad wire loom

i may look at swapping

steptoe · Post by **steptoe** » Mon Feb 08, 2010 10:54 pm

There was a few guys in Mudgee that were into Subarus. I bought a gearbox off a guy on a hobby farm south of Canberra a few years ago and he had heaps of stuff - Brumbys , MY wagon and coupe doors ,bits, and L Series stuff , RX box, manuals all over the shop. Two car trailers later it was all gone - to Mudgee. Might need to sniff around the region and see if they can help.