Conversion from 98 gt forester to 97 wrx??
Conversion from 98 gt forester to 97 wrx??
I have a 98 gt forester auto with a blown engine, i want to upgrade the motor to a wrx and have found a good priced 97 wrx halfcut manual with under 100,00km..ive been told the gear ratios are different so need to replace the diff centre, does anyone know of any problems that will occur during the conversion or know of a better swapover for the 98 model..with the halfcut you get engine,ecu,wiring loom and gearbox so i assume there should be no problems..any info would be much appreciated..cheers...
- AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
you will need to replace the rear diff or front diff inside the gearbox to match.
There is no ratio in the centre diff.
The swap over should be straight forward as long you have the electrics right to match in both Impreza and Foz.
Cheers
AP
There is no ratio in the centre diff.
The swap over should be straight forward as long you have the electrics right to match in both Impreza and Foz.
Cheers
AP
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic
