Need EA82 NA MPFI 87+ cams .

Get the most out of your ride & how to make enhancements ...
Post Reply
User avatar
discopotato03
Senior Member
Posts: 2134
Joined: Sun Mar 18, 2007 9:29 am
Location: Sydney

Need EA82 NA MPFI 87+ cams .

Post by discopotato03 » Wed Apr 15, 2009 4:09 pm

Hi all , I need a good pair of 87+ EA82 MPFI NA camshafts .
No EFI cars at the wreckers ATM so if anyone wants to sell them too me please let me know .

Cheers A .

User avatar
SCOOBIDOO
Junior Member
Posts: 162
Joined: Thu May 11, 2006 10:00 am
Location: Sydney/Adelaide
Contact:

Post by SCOOBIDOO » Wed Apr 15, 2009 7:31 pm

I have a pair...from a twin port efi n/a engine i just used for bits..a2 a7 is that what you want?
THE FASTER THE SPEED - THE BETTER THE IMPACT...SUBARU

User avatar
BlackMale
General Member
Posts: 1750
Joined: Thu Oct 06, 2005 10:00 am
Location: Out Bush

Post by BlackMale » Thu Apr 16, 2009 11:12 am

Oh are you for real... just binned some in the last few weeks as i really had no need for em. Sorry Buddy. If i find any more i'll let you know however i think i only had 1 set.
Toyota 105 Series LandCruiser (that nobody on here wants to really hear about).
RX Touring Wagon - fitted out for 4WDing (currently collecting dust).
RX Project - will be road only at this stage (and currently taking way to long to finish).

User avatar
AndrewT
Senior Member
Posts: 4777
Joined: Tue Oct 04, 2005 10:00 am
Location: WA
Contact:

Post by AndrewT » Thu Apr 16, 2009 11:18 am

Check with Pete (Coupe) from Perth. He bought two n/a MPFI motors off me with the intent of mixing them together with some of his other turbo motors I think to make a good one. He will likely have lots of leftovers. Both motors were from 1989 touring wagons.

User avatar
discopotato03
Senior Member
Posts: 2134
Joined: Sun Mar 18, 2007 9:29 am
Location: Sydney

Post by discopotato03 » Thu Apr 16, 2009 12:25 pm

They are identified by having 1 ring on the smallest diameter section of the camshaft ("B") section , and 2 rings on the slightly larger diameter ("C")section directly behind the B section .
Sections B and C are between the second and third cam lobe .

Cheers A .

User avatar
SCOOBIDOO
Junior Member
Posts: 162
Joined: Thu May 11, 2006 10:00 am
Location: Sydney/Adelaide
Contact:

Post by SCOOBIDOO » Thu Apr 16, 2009 9:54 pm

there good to go,or are you still looking? these are 9 month 89 cams and mike up as new..
Image
THE FASTER THE SPEED - THE BETTER THE IMPACT...SUBARU

User avatar
discopotato03
Senior Member
Posts: 2134
Joined: Sun Mar 18, 2007 9:29 am
Location: Sydney

Post by discopotato03 » Fri Apr 17, 2009 9:50 am

Yes I think they would do nicely , just let me look up an 89 WSM I have saved and double check that they didn't change between 87 and 89 .

Cheers A .

User avatar
discopotato03
Senior Member
Posts: 2134
Joined: Sun Mar 18, 2007 9:29 am
Location: Sydney

Post by discopotato03 » Fri Apr 17, 2009 3:19 pm

Actually there may be a problem , I got the Subaru parts people to cross reference the 87/88/89 MPFI NA camshafts and the part numbers of the 88/89cams are different from the 87's .

I don't suppose anyone has an Australian spec 88/89 Factory WSM to look the late cam specs up in ?

May have to hold out for 87 MPFI NA cams .

Cheers A .

Post Reply

Return to “Conversions, Modifications and Performance Upgrades”