i have my eyes on 1x 5 spoke 17" rim on ebay from 04 to 06 Liberty (i have 3rims and one short), the guy said its too heavy to send it via auspost, its just rim only, its in Sydney and i'm in Melbourne. Does anyone have an idea or rough idea of how heavy is it?
Cheers
AP
Edit: no tyre included
how heavy - MY04-06 5spoke rim?
- AlpineRaven
- Senior Member
- Posts: 3682
- Joined: Wed Oct 19, 2005 10:00 am
- Location: Melbourne, Victoria, Australia.
how heavy - MY04-06 5spoke rim?
Subarus that I have/had:
1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

1995 Liberty "Rallye" - 5MT AWD, LSD - *written off 25/8/06 in towing accident.
1996 Liberty Wagon - SkiFX AWD 5MT D/R, Lifted.. Outback Sway Bar, 1.59:1 Low Gearing see thread: 1.59:1 in EJ Box Page
Sold at 385,000kms in July 2011.
2007 Liberty BP Wagon, 2.5i automatic

Work on 8kgs (17lbs) at the min and 11kgs (24lbs) as the max going by another Aust. website as the weights change between models and years.AlpineRaven wrote:i have my eyes on 1x 5 spoke 17" rim on ebay from 04 to 06 Liberty (i have 3rims and one short), the guy said its too heavy to send it via auspost, its just rim only, its in Sydney and i'm in Melbourne. Does anyone have an idea or rough idea of how heavy is it?
Cheers
AP
Edit: no tyre included
Peter


AP, I'm going up to Albury around the 14th and know a few guys in Sydney who are coming down that same day, I could bring it back for you if you want (you might need to cover their cost to pick up the rim depending on where in Sydney it is)...
Dean.
Dean.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.