EA82 head gasket part numbers

LTurbo · Post by **LTurbo** » Tue Nov 11, 2008 12:51 pm

Does anyone know if the part numbers are different for EA82 and EA82T replacement head gaskets?
Cheers

timmo · Post by **timmo** » Tue Nov 11, 2008 7:19 pm

no they're the same part.

LTurbo · Post by **LTurbo** » Tue Nov 11, 2008 7:42 pm

Wierd

, the FSM says the head gasket for the turbo version uses a carbon sheet, and the n/a versions a silicon-coated asbestos.

But I can only find a part number for N/A engines (e.g. BN550MT). I guess the materials they use these days a suitable for both?

Gannon · Post by **Gannon** » Tue Nov 11, 2008 7:53 pm

I too have heard that they are different.

Cant remember where though

Are you using genuine?

steptoe · Post by **steptoe** » Wed May 27, 2009 12:05 am

I recognise the 550 part number as coming off EA82T's.

Think I have seen a listing for the turbo variant being different

Has anyone got a good recommended brand and type of head gasket for the EA82T.

I am thinking just to go along to Subaru and get just two head gaskets for EA82T, surely there has to be better?

You may get a different number for efi difference being DN561 but set contains same head gasket the 550

twilightprotege · Post by **twilightprotege** » Wed May 27, 2009 9:28 pm

i just used 2 BN550's on my EA82T. supplied by justin aka xtreme_rx (one of them, 1 from repco), so i'm sure he'd have the right part number

The AUSubaru.com.au Forums

EA82 head gasket part numbers

EA82 head gasket part numbers

OK let's push this further along then....