anyone have a liberty 4EAT TCU?

nncoolg · Post by **nncoolg** » Sun Nov 21, 2010 2:47 pm

Hi, wondering if anyone has a TCU out of a AWD auto liberty wreck or from a manual conversion? thanks.

Gannon · Post by **Gannon** » Sun Nov 21, 2010 7:47 pm

Which model? Gen1 and 2 were different to Gen3 and later

I have a Gen2 Outback TCU

If it suits, i'll drop it off to ya dad or I can post it to ya

nncoolg · Post by **nncoolg** » Sun Nov 21, 2010 7:54 pm

Hey Gannon - was just reading Toms conversion thread, sounds pretty good! Theres gonna be a few cool older subes in old macksville now

Um, Im really not sure exactly what model but the numbers on it are :

a large 'EE'
then, 31711 AA911
then, A64-000-822

Im after a set of connectors to suit too guys if anyone has an old loom...

thenks man

Gannon · Post by **Gannon** » Sun Nov 21, 2010 9:03 pm

I actually have 2

One is a 95 NA Auto

KS
31711 AC544
A64-000-DP3

The other is apparently from an RS Turbo

HV
31711 AC161
A64-000 RX4

I also have the 3 plugs with about 6 inches of wire on them

nncoolg · Post by **nncoolg** » Thu Nov 25, 2010 6:03 am

...anyone has a Gen1 auto TCU?

vincentvega · Post by **vincentvega** » Thu Nov 25, 2010 6:56 am

yeah have a couple spares. what are you trying to use it for? There are different types, even within gen1

nncoolg · Post by **nncoolg** » Thu Nov 25, 2010 4:47 pm

cool man, im looking for this one:

a large 'EE'
then, 31711 AA911
then, A64-000-822

...cooking up something...

cheers

RSR 555 · Post by **RSR 555** » Thu Nov 25, 2010 7:20 pm

PM Gleno and ask him to check the one we removed from his harness (just converted his L) I think it's still in the workshop. It's a Gen1 Ser1 Auto donor car.

nncoolg · Post by **nncoolg** » Sun Dec 05, 2010 8:21 am

Where abouts are the TCU's in libertys, I may have to go hunting at a yard...

AlpineRaven · Post by **AlpineRaven** » Thu Dec 09, 2010 8:04 pm

nncoolg wrote:Where abouts are the TCU's in libertys, I may have to go hunting at a yard...

I think they were located under the carpet on passenger's feet floor (towards firewall).
Cheers
AP

vincentvega · Post by **vincentvega** » Thu Dec 09, 2010 8:42 pm

nope. he needs a gen1 TCU. they are under the dash mate, behind the ECU. arm yourself with a philips driver to get the trim off, and a 10mm spanner and 10mm 1/4 drive socket to get the TCU and ECU out. 10mm ratched spanner makes it even easier if you have one.

you are looking for a early S1 lib for the part number you are after.