anyone know the stud thread pattern for peugeot?

vidler · Post by **vidler** » Fri Mar 30, 2007 8:06 pm

ie, subi's have 12x1.25 thread on the studs... anyone know what pugs have?

SuBaRiNo · Post by **SuBaRiNo** » Fri Mar 30, 2007 8:09 pm

Should be the same cos your meant to use the pug nuts on the Subies when u are running pug rims.

Dave

vidler · Post by **vidler** » Fri Mar 30, 2007 8:13 pm

cross my fingers:) had to round up 16 crappy suby nuts to put on the car to keep the 13" rims on it so i can take the pug nuts...

all this talk about nuts, i tell ya................

Subafury · Post by **Subafury** » Fri Mar 30, 2007 8:14 pm

ill be able to double check for u when i go to work on tues. but yh should be the same as pugs

vidler · Post by **vidler** » Fri Mar 30, 2007 8:22 pm

ill be finding out tomorrow when i get my 15" alloy pugs:)

AndrewT · Post by **AndrewT** » Fri Mar 30, 2007 9:54 pm

If the 13's are purely so the car can be rolled around the place then 8 would have done

I'll let u know around 12:30 tomorrow how many 13's i can give u.

vidler · Post by **vidler** » Fri Mar 30, 2007 10:45 pm

got a set off suba doober so im right for 13" now... got 6 of em

mroberts · Post by **mroberts** » Fri Mar 30, 2007 11:19 pm

vidler wrote:ill be finding out tomorrow when i get my 15" alloy pugs:)

Let us know how the offset works out.