Another EJ22 and loom "bench" test

Post Reply
User avatar
El_Freddo
AUSUBARU MASTER
Posts: 11945
Joined: Tue Oct 04, 2005 10:00 am
Location: Benders (aka Bendigo) Vic

Another EJ22 and loom "bench" test

Post by El_Freddo » Mon Jun 10, 2019 10:15 pm

So, I'm at it again :mrgreen:

Here's my second EJ conversion first start up in my makeshift testing "facility", pretty much bang on 10 years since doing the one for Ruby Scoo.

https://youtu.be/vBXrmIzWiZY

And back in 2009:

https://youtu.be/CUjKbPrZDLM

Needless to say, I'm pretty happy with this result!

More on it later, probably in the appropriate build thread ;)

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

User avatar
TOONGA
AUSUBARU ELDER
Posts: 5280
Joined: Sat May 30, 2009 10:15 am
Location: Australind closer to where they divided by zero
Contact:

Re: Another EJ22 and loom "bench" test

Post by TOONGA » Tue Jun 11, 2019 8:43 am

Bennie nicely done I have to do this to an EJ18 eventually.

I will probably go this way if I can find a broken gearbox
Image
(not my image)

If not I have a box sitting on the ground here I can bolt my engine up to

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
El_Freddo
AUSUBARU MASTER
Posts: 11945
Joined: Tue Oct 04, 2005 10:00 am
Location: Benders (aka Bendigo) Vic

Re: Another EJ22 and loom "bench" test

Post by El_Freddo » Tue Jun 11, 2019 12:16 pm

Thanks mate.

My only concern with mounting the starter like that is you expose the flywheel. I can be a little OHS over the top at times but I think it easy to overcome. Plus you’d need to have an eight bolt engine for this to work, or shave the bell housing down to include the lower stud.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube

Post Reply