EOI Project Brumby Components

User avatar
Corax
Junior Member
Posts: 242
Joined: Tue May 27, 2008 9:53 pm
Location: Bunbury WA

EOI Project Brumby Components

Post by Corax » Sun Apr 04, 2010 7:08 pm

Hey Suba-Dudes,

Time to unload a shirtload of stuff. Will put up photos in the for sale section if anybody shows interest. This was going to be a project build but due to me getting another 'project car' this one is just not going to happen. Items include...

1. 1985 Targa Brumby with 2" lift kit, 14" rims, central locking and a slightly customised interior. Not the best out there but far from the worst.
2. 2002 EJ25 SOHC motor with full wiring harness and ECU. Done 63K
3. Injen cold air intake kit for the above moter. Never been installed.
4. Headers/Extractors for the EJ25.
5. Manual Gearbox from a late 90s RS turbo.

Plus boxes of other stuff mainly from a 2002 RS impreza. Other stuff as well but cant think of it at the mo.
Please note as well if you pm me it might be a while before I get back to you as I am not always in front of a pc.

Cheers,
Corax.

User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:

Post by TOONGA » Sun Apr 04, 2010 7:29 pm

Ive seen the brumby thats up for sale and I can say grab it quick (wish I had the money I would for sure)

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
Corax
Junior Member
Posts: 242
Joined: Tue May 27, 2008 9:53 pm
Location: Bunbury WA

Photos

Post by Corax » Mon Apr 05, 2010 4:21 pm

Hey Suba-Dudes,

Trying to upload some photos... you'll find them somewhere on this site!

Cheers,
Corax
Attachments
Subaru 1985 Targa Brumby.jpg
Subaru 1985 Targa Brumby.jpg (116.08 KiB) Viewed 3901 times

User avatar
Corax
Junior Member
Posts: 242
Joined: Tue May 27, 2008 9:53 pm
Location: Bunbury WA

Post by Corax » Tue Apr 06, 2010 12:49 am

more photos
Attachments
EJ25 SOHC Motor.jpg
EJ25 SOHC Motor.jpg (108.64 KiB) Viewed 3846 times

User avatar
chriSTIan
Junior Member
Posts: 397
Joined: Wed Oct 05, 2005 10:00 am
Location: PERTH,WA

Post by chriSTIan » Tue Apr 06, 2010 12:43 pm

Are you selling in one package or splitting up?
Is the brumby running?licenced?
Price?
Thanx
Chris

User avatar
Corax
Junior Member
Posts: 242
Joined: Tue May 27, 2008 9:53 pm
Location: Bunbury WA

Post by Corax » Tue Apr 06, 2010 10:39 pm

Ok not many photo's won't let me upload more than one at a time. To frustrating.

Prices

Brumby 3900 ono.
Motor+ecu 1000 ono
Injen kit 200 ono
Extractors 150 ono
Gearbox 400 ono

Also got a converted radiator, hydralic clutches and lots of other stuff.

Chris - Yeah the brumby is licenced and runs and yeah would like to unload it all to the same person if i could. Would like to see this moter dropped in this car:) Would seriously discount the above total of the above prices if someone was going to carry on with the project. Would also like to see this car go to a good home.

Cheers,
Corax.

User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:

Post by TOONGA » Fri Apr 09, 2010 5:20 pm

well I went to see Corax today and grabbed the headers and converted radiator so they are gone but he still has all of this to sell

late 90's gearbox (he may even throw in the cement ring)
Image

assorted dash components and air pipes
Image

heater /aircon box and filter
Image

3 of these rims and the emergency spare
Image

Injen air kit complete (the kit is new as well) with bonus air sensor
Image

brumby radiator (used)
Image

Ej25 complete harness, plus computer and rear harness and spare front harness
Image
Image

more to come

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:

Post by TOONGA » Fri Apr 09, 2010 5:22 pm

power steering? and more air bits
Image

dash stuff
Image

steering knuckle
Image

bits (boxes not included)
Image
Image
Image
Image

Hydraulic clutch kit peddle master and slave x2
Image

More to come

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:

Post by TOONGA » Fri Apr 09, 2010 5:22 pm

centre consoles
Image

EJ25
Image
Image

the brumby
Image
Image
Image
Image

last but not least some EJ flywheels (one seems to be dual plate)

Image

TOONGA


TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
RSR 555
Elder Member
Posts: 6951
Joined: Sat Nov 10, 2007 10:42 am
Location: ATM... stuck in Rockingham

Post by RSR 555 » Fri Apr 09, 2010 10:18 pm

TOONGA wrote:brumby radiator (used)
Image
I'd like this :)
TOONGA wrote:Hydraulic clutch kit peddle master and slave x2
Image
And this too please :)
You know you are getting old when the candles on your birthday cake start to cost more than the cake itself.

RSR Performance
Home of the 'MURTAYA' in Oz
Subaru Impreza WRX based Sportscar
[SIGPIC][/SIGPIC]

Disclaimer: Not my website but hyperlink here to Subaru workshop manuals

User avatar
chriSTIan
Junior Member
Posts: 397
Joined: Wed Oct 05, 2005 10:00 am
Location: PERTH,WA

Post by chriSTIan » Sat Apr 10, 2010 8:31 pm

What car did all this gear come from?What year?

User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:

Post by TOONGA » Sat Apr 10, 2010 9:12 pm

the Ej25 is from a 2001 (can't remember what car corax said it was) so most of the interior is 2001 the gearbox however is from a late 90's rx

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
Corax
Junior Member
Posts: 242
Joined: Tue May 27, 2008 9:53 pm
Location: Bunbury WA

Post by Corax » Sun Apr 11, 2010 12:44 am

Motor, harness, interior plastics and the majority of the stuff in the plastic tubs comes from a 2001 RS Imperza. The bloke I bought it all off said that the car that they were taken from had done only 63000km's. Bit of a weird story really, his mate bought a 2001 2.5 impreza and decided it wasn't fast enough so he had it converted into a WRX ie 2.5 turbo. This stuff is everything subaru had to rip out to put in the new motor. Would have been cheaper to sell the original car and go off and buy a WRX in my opinion.
The rest of the stuff is just things I have found trawling the net that I was going to use in the conversion of the targa brumby. Personally I think this car would have rocked with his motor in it.

Cheers,
Corax.

User avatar
chriSTIan
Junior Member
Posts: 397
Joined: Wed Oct 05, 2005 10:00 am
Location: PERTH,WA

Post by chriSTIan » Fri Apr 30, 2010 7:03 pm

Hi
Have you sold the engine?
Is it in Bunbury?

User avatar
Corax
Junior Member
Posts: 242
Joined: Tue May 27, 2008 9:53 pm
Location: Bunbury WA

Post by Corax » Mon May 03, 2010 11:02 am

Hi ChriSTIan,

Yeah still got it, plenty of interest but no-one seems to be able to come up with the money. Yeah its in Buno.

Cheers,
Corax.

User avatar
TOONGA
Elder Member
Posts: 5339
Joined: Sat May 30, 2009 10:15 am
Location: Mandurah where they divided by zero
Contact:

Post by TOONGA » Wed Jun 23, 2010 5:58 pm

radiators are gone, box of slave and master cylinders are gone, wheels are gone (safety tyre is still there) consoles are gone

everything else is still for sale

TOONGA
Image
PJ Gone but not forgotten
JETCAR AKA the sandwedge Rusted in pieces

User avatar
Corax
Junior Member
Posts: 242
Joined: Tue May 27, 2008 9:53 pm
Location: Bunbury WA

Post by Corax » Sat Jun 26, 2010 4:12 pm

Gearbox is gone. Come on guys there must be someone out there who wants to drop an EJ25 into their Brumby:)

User avatar
Chrus
Junior Member
Posts: 100
Joined: Thu May 15, 2008 2:42 pm
Location: Welly NZ

Post by Chrus » Wed Jun 30, 2010 11:37 am

Hello Corax - is this brumby still up for grabs? Targa version is wicked imo! ;)
MY05 WRX STI Spec C Type Ra
MY05 Legacy Outback LLBean
89 Legacy RS Turbo

User avatar
Corax
Junior Member
Posts: 242
Joined: Tue May 27, 2008 9:53 pm
Location: Bunbury WA

Post by Corax » Wed Jun 30, 2010 8:34 pm

Hi Chrus,

Yeah mate still got it, and yeah the targa version rocks! Plus on this car they dont leak either.If you want to come and have a look sometime just pm me and we can organise a time/place. Note that I live in Bunbury. Also if you want another independent opinion about the car you can talk to Toonga as he has seen it a few times.

Cheers,
Corax.

User avatar
Chrus
Junior Member
Posts: 100
Joined: Thu May 15, 2008 2:42 pm
Location: Welly NZ

Post by Chrus » Wed Jun 30, 2010 10:51 pm

Corax wrote:Hi Chrus,

Yeah mate still got it, and yeah the targa version rocks! Plus on this car they dont leak either.If you want to come and have a look sometime just pm me and we can organise a time/place. Note that I live in Bunbury. Also if you want another independent opinion about the car you can talk to Toonga as he has seen it a few times.

Cheers,
Corax.
PM sent boss
;)
MY05 WRX STI Spec C Type Ra
MY05 Legacy Outback LLBean
89 Legacy RS Turbo

Post Reply

Return to “Western Australia”