What type of LSD is this?

phillatdarwin · Post by **phillatdarwin** » Wed Oct 28, 2009 10:57 pm

looks like there is a crack in there but it mite just be the pic

nncoolg · Post by **nncoolg** » Thu Oct 29, 2009 5:29 am

...that's what I thought too.

guyph_01 · Post by **guyph_01** » Thu Oct 29, 2009 1:20 pm

Let me know if you want more pics, etc.

AndrewT · Post by **AndrewT** » Thu Oct 29, 2009 2:48 pm

definitely no cracks between valves there by the looks.

Porty · Post by **Porty** » Thu Oct 29, 2009 7:16 pm

I brought guyphs other MPFI head off him.. And it was in great condition.. They had been cracked, but properly repaired and also had the valve seats and valve guides replaced... Its back in the car and havn't had a prob with it..

nncoolg · Post by **nncoolg** » Thu Oct 29, 2009 7:34 pm

ooooh, okay, how can you tell they have been reco'd?

Porty · Post by **Porty** » Thu Oct 29, 2009 8:13 pm

youd have to pull one of the valves out..

EDIT: also judging by the amount of material left on those seats id say this head has probs had the works..

twilightprotege · Post by **twilightprotege** » Thu Oct 29, 2009 8:15 pm

question with the head - the top right hand head bolt hole in this pic

looks dirty. i had found on my heads that coolant gets in to that area and blows out of the bolt hole just above it. i assume that's because there are some cracks in my heads that arent at the valve area.

does anyone have any other thoughts on this?

guyph_01 · Post by **guyph_01** » Fri Oct 30, 2009 1:35 am

Like i said, those head are out of an engine that had milky oil, It looks ok but i dont know more than that. I can send you pics of whatever area you want.

Porty, Im happy to hear your happy with the head you bought:)