The fuel tank on my Brat is rotten through and so I've had to pull it out whilst fitting the 3 inch lift. I want to replace it preferably with an aftermarket tank of more robust construction and as a result of the lift have a little more room to play with. Does anyone have any details on anything that fits either from another type of vehicle or from a bespoke manufacturer?
Cheers,
John
Fuel tank for Brat
-
Pommiebrat
- Junior Member
- Posts: 44
- Joined: Wed Jun 25, 2008 7:17 pm
- Location: Exeter, UK
-
brumbyrunner
- General Member
- Posts: 1743
- Joined: Mon Apr 10, 2006 10:00 am
- Location: SEQ
Never heard of an aftermarket fuel tank for a Brat but they are plentiful in OZ so another one would not be hard to procure.
The reason for my post is to say, get a new one made. If you're installing a lift kit you can even make it 3" deeper. They are a very basic shape as far as fuel tanks go.
The reason for my post is to say, get a new one made. If you're installing a lift kit you can even make it 3" deeper. They are a very basic shape as far as fuel tanks go.
Settlement Creek Racing
From memory the MY wagon is slightly deeper than the Brumby & coupe and fits right in ?
Dean.
Dean.
1989 Brumby - Shiny new red paint, stroked EJ20 phase 2 SOHC with Darton sleeves bored to EJ22, Wiseco high-compression pistons, Delta 2000 grind cams , EJ/XT6 5 stud with WRX 4/2 pots, 5-speed, 86 GTS seats and so much more.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
Contact me for reproduction XT6 hubs...and EA82 rear discs.
