not having much luck getting it out, dont really want to pull the engine out.
stuck bolt
stuck bolt
any suggestions on getting a piece of bolt from an engine, the harmonic balancer decided to fall off, leaving some of the bolt in there 
not having much luck getting it out, dont really want to pull the engine out.
not having much luck getting it out, dont really want to pull the engine out.
Erica ..
95 Liberty sedan
previous cars:
88 RXturbo sedan (aww i miss you)
83 GLFA leone coupe
95 Liberty sedan
previous cars:
88 RXturbo sedan (aww i miss you)
83 GLFA leone coupe
- Gannon
- Senior Member
- Posts: 4580
- Joined: Sat Nov 05, 2005 10:00 am
- Location: Bowraville, Mid Nth Coast, NSW
What made your crank pulley (subaru's dont have/need a harmonic balancer) just fall off?
If you dont wanna pull the engine,.. just take out the radiator and the front grill so you can access the end of the crank and you will have to drill the remaining piece of bolt with a reverse drill or an "easy out"
If you dont wanna pull the engine,.. just take out the radiator and the front grill so you can access the end of the crank and you will have to drill the remaining piece of bolt with a reverse drill or an "easy out"
Current rides: 2016 Mitsubishi Triton GLS & 2004 Forester X
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------
Ongoing Project/Toy: 1987 RX Turbo EA82T, Speeduino ECU, Coil-pack ignition, 440cc Injectors, KONI adjustale front struts, Hybrid L Series/ Liberty AWD 5sp
Past rides: 92 L series turbo converted wagon, 83 Leone GL Sedan, 2004 Liberty GT Sedan & 2001 Outback
------------------------------------------
i dont really know what made it fall off, dodgy bolt???
i've taken the radiator out and the grill, wrecked the cog getting to it, but the mechanics drill he has, wont fit in the space we made, he has tried the "easy out" option.
i've taken the radiator out and the grill, wrecked the cog getting to it, but the mechanics drill he has, wont fit in the space we made, he has tried the "easy out" option.
Erica ..
95 Liberty sedan
previous cars:
88 RXturbo sedan (aww i miss you)
83 GLFA leone coupe
95 Liberty sedan
previous cars:
88 RXturbo sedan (aww i miss you)
83 GLFA leone coupe
- subybrumby
- Junior Member
- Posts: 870
- Joined: Thu Jun 28, 2007 5:03 pm
- Location: Toowoomba
Nooooo - ten you may end up with a bigger chunk in there:)
Easy outs are all well and good however break one off and you end up with a high tensile problem as well...
I have a dremel with a carbide tip I use to slot busted studs and astray bolts. It is fiddly work and very very slow however once slotted I can use a screwdriver to remove it.
Good luck with your bolt...
Easy outs are all well and good however break one off and you end up with a high tensile problem as well...
I have a dremel with a carbide tip I use to slot busted studs and astray bolts. It is fiddly work and very very slow however once slotted I can use a screwdriver to remove it.
Good luck with your bolt...
Rob Forsyth