XT6 Hubs???? A few Questions

Gannon · Post by **Gannon** » Wed Dec 07, 2005 5:07 pm

Has anyone ever imported, sourced or converted to XT6 hubs?
I like the idea of being able to put liberty or impreza wheels on my soob and if parts are easy enough to come by, it would be a lot easier than re-drilling and machining our hubs to fit other wheels.

it is quite a simple mod, as outlined on the usmb.

All opinions are welcome

Cheers

subarursliberty · Post by **subarursliberty** » Wed Dec 07, 2005 8:40 pm

As above.

Pictures would be good as well. A simple shot of the hub alone would be tops.

wagonist · Post by **wagonist** » Wed Dec 07, 2005 11:57 pm

not sure if this page exists any more
http://www.corkysrocks.net/SubaruPage.htm

This is the one for the brake conversion, step by step

http://corkysrocks.net/Conversion%204%20to%205.htm

Ben · Post by **Ben** » Thu Dec 08, 2005 8:08 pm

I did it about 5 years ago.

Cost me about $1600 to have - Hubs, driveshafts, brakes, rear arms, hubs and brakes delivered.

They came from NZ.

Honestly, there is far better ways to skin this cat...

subarursliberty · Post by **subarursliberty** » Thu Dec 08, 2005 8:26 pm

MechaWagon wrote:I did it about 5 years ago.

Cost me about $1600 to have - Hubs, driveshafts, brakes, rear arms, hubs and brakes delivered.

They came from NZ.

Honestly, there is far better ways to skin this cat...

Yeap. $1600 has answered all the questions I need to know.