car hangs low at back
- suba_dooba
- Junior Member
- Posts: 198
- Joined: Thu Dec 21, 2006 2:14 am
- Location: Perth, WA
car hangs low at back
hey. as you might know just recently got a 3" lift and i have noticed my car hangs low at the back. is there a reason for this and if so can it be fixed? there have been a few who suggested things but no one has really put thioer finger on the problem.
any help would be appreciated
cheers
Sean
any help would be appreciated
cheers
Sean
1991 Subaru L series enduro wagon--3" lift, kings, gabriels front with kybs back (no longer kybs back due to strut plates breaking at wedge), cb, .... Future mods are a pipedream at the moment due to money issues.
I really should start thinking of making a picture for my sig
I really should start thinking of making a picture for my sig
gto some 2wd rear struts. reason being is the spring base plate on 4wd struts sits physically lower on the strut that 2wd ones, putting less pressure on the spring allowing the shock to compress more. If you get 2 wd shocks im pretty sure the base is around 15 - 20mm higher. This is what i was told after i sold my L. this problem bugged me heaps too but i never got round to fixing it
09 Forester XT Touring Wagon
2WD rear struts? The spring base sits lower than the 4WD versions making the rear sit lower.
What brand of shock absorber is in the car?
What brand of shock absorber is in the car?
SubiParts Australia - Australia's BIGGEST Aftermarket Subaru Parts Specialist
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
- Suby Wan Kenobi
- General Member
- Posts: 1914
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Sunny Godwin Beach Qld
- suba_dooba
- Junior Member
- Posts: 198
- Joined: Thu Dec 21, 2006 2:14 am
- Location: Perth, WA
i ahve gabreil shocks with king springs
1991 Subaru L series enduro wagon--3" lift, kings, gabriels front with kybs back (no longer kybs back due to strut plates breaking at wedge), cb, .... Future mods are a pipedream at the moment due to money issues.
I really should start thinking of making a picture for my sig
I really should start thinking of making a picture for my sig
Are they 2WD? Do you know the part number of them?
SubiParts Australia - Australia's BIGGEST Aftermarket Subaru Parts Specialist
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
- suba_dooba
- Junior Member
- Posts: 198
- Joined: Thu Dec 21, 2006 2:14 am
- Location: Perth, WA
no but subi matt knows exactly what i have as i bought it through him
1991 Subaru L series enduro wagon--3" lift, kings, gabriels front with kybs back (no longer kybs back due to strut plates breaking at wedge), cb, .... Future mods are a pipedream at the moment due to money issues.
I really should start thinking of making a picture for my sig
I really should start thinking of making a picture for my sig
- stamp_licker
- General Member
- Posts: 1066
- Joined: Wed Oct 05, 2005 10:00 am
- Location: Kallangur.Bris North
measure from the mounting bolt to base plate.150mm is good ,125mm is not.Ive got kings springs on kyb shocks and you can move the spring around .The shocks have a 125mm high base plate.Also have a look at the rear shock spacers you may have a 2" one .
[SIGPIC][/SIGPIC]aka the_postie
Building a hardcore postie:D
Building a hardcore postie:D
yeha...i have 2wd rear kyb's and they were actually physically longer than the originals i took out..thats why the arse end of my car is so tall..subwoofer seems to even it out though 
Alex

Alex
my07 Outback
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.
previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.
my13 Hyundai i45(shhhh)
my02 Gen3 Liberty limited ed.
previously
L-series wagon, LSD, EJ20turbo, 29in tyres, 'wanky wagon'
2000 gen3 outback, lifted, otherwise stock.
yeha...i have 2wd rear kyb's and they were actually physically longer than the originals i took out..thats why the arse end of my car is so tall..subwoofer seems to even it out thoughXtreme_RX wrote:2WD rear struts? The spring base sits lower than the 4WD versions making the rear sit lower.
What brand of shock absorber is in the car?
Alex
Check Mate:)
09 Forester XT Touring Wagon
- suba_dooba
- Junior Member
- Posts: 198
- Joined: Thu Dec 21, 2006 2:14 am
- Location: Perth, WA
ok i think i understood that. so in order to jack the back up i need to replace the existing shocks with 2wd reatr kyb;s or soemthing?
1991 Subaru L series enduro wagon--3" lift, kings, gabriels front with kybs back (no longer kybs back due to strut plates breaking at wedge), cb, .... Future mods are a pipedream at the moment due to money issues.
I really should start thinking of making a picture for my sig
I really should start thinking of making a picture for my sig
Ok, KYB do it differently to everybody else, or does everybody else do it differently?
2WD KYB sit higher than the 4WD versions.
2WD Pedders/Monroe sit Lower than the 4WD versions.
Go figure..........
2WD KYB sit higher than the 4WD versions.
2WD Pedders/Monroe sit Lower than the 4WD versions.
Go figure..........
SubiParts Australia - Australia's BIGGEST Aftermarket Subaru Parts Specialist
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
http://www.subiparts.com.au
BlackBox Motorsports - Subaru Suspension Systems
http://www.blackboxmotorsports.com.au
0438 887 746
'L' Series Touring Wagon - EJ22 & 4.111 AWD
Gen 1 Liberty GX – Worked EJ22 & 4.11 AWD
- suba_dooba
- Junior Member
- Posts: 198
- Joined: Thu Dec 21, 2006 2:14 am
- Location: Perth, WA
o i have gabriels. they must sit lower. any idea on price for 2wd rear kybs?
1991 Subaru L series enduro wagon--3" lift, kings, gabriels front with kybs back (no longer kybs back due to strut plates breaking at wedge), cb, .... Future mods are a pipedream at the moment due to money issues.
I really should start thinking of making a picture for my sig
I really should start thinking of making a picture for my sig
lol. i think its just a brain teaser:)Xtreme_RX wrote:Ok, KYB do it differently to everybody else, or does everybody else do it differently?
2WD KYB sit higher than the 4WD versions.
2WD Pedders/Monroe sit Lower than the 4WD versions.
Go figure..........
when i got the 4wd kyb's for my L direct from subaru they were $117 a side, so i'd imagine something similar to that
09 Forester XT Touring Wagon
- suba_dooba
- Junior Member
- Posts: 198
- Joined: Thu Dec 21, 2006 2:14 am
- Location: Perth, WA
but matt has the gabriels and his rear doesnt sag down...hmmm..odd
no more subarus
[/SIZE] [/color][/B][/color][/SIZE][/color]http://community.webshots.com/user/D3V1L9
[/SIZE] [/color][/B][/color][/SIZE][/color]http://community.webshots.com/user/D3V1L9
- stamp_licker
- General Member
- Posts: 1066
- Joined: Wed Oct 05, 2005 10:00 am
- Location: Kallangur.Bris North