SubaXtreme

Xtreme_RX · Post by **Xtreme_RX** » Tue Dec 12, 2006 2:55 pm

SubaXtreme are now back & trading.
If anybody wants prices, info & models please email me at
[email protected]....

brumbyrunner · Post by **brumbyrunner** » Wed Dec 13, 2006 11:15 am

Are you an agent for them?

Xtreme_RX · Post by **Xtreme_RX** » Wed Dec 13, 2006 12:43 pm

I will be verry soon......

brumbyrunner · Post by **brumbyrunner** » Wed Dec 13, 2006 1:20 pm

I sent you an email but others may be interested in this.

Are Subaextreme doing anything for MY or L series?

Wilbur · Post by **Wilbur** » Wed Dec 13, 2006 1:59 pm

Do you need a bar stuart ?

AndrewT · Post by **AndrewT** » Wed Dec 13, 2006 3:26 pm

Hopefully they might consider it under the new management.
I tried to convince them about 6 months ago and they would only make rear bars for L series if they got a minimum purchase of 10.
This is because the main piece of metal is specially extruded for them by a third party.

Chris_Rogers · Post by **Chris_Rogers** » Wed Dec 13, 2006 7:43 pm

if they can copy the original one in a MUCH thicker bit of steel I'd be interested.

brumbyrunner · Post by **brumbyrunner** » Thu Dec 14, 2006 6:46 am

Lightning_Silver_RX wrote:Do you need a bar stuart ?

watcha got?

Wilbur · Post by **Wilbur** » Thu Dec 14, 2006 8:59 am

If we can get an order of 10 together I can get some alloy bumper replacement bullbars done with 3 inch centre pipe and 2.5 inch shoulders. Would be over a grand each though (like all new bars).

brumbyrunner · Post by **brumbyrunner** » Thu Dec 14, 2006 9:54 am

what about a matching rear bar and 3" rollbar. One that bolts into the bed and back onto the wheel arches.
Who's building them?
PM me if you want. I wouldn't want to cut you out.

Wilbur · Post by **Wilbur** » Thu Dec 14, 2006 12:14 pm

I'll send you an email.

Wilbur · Post by **Wilbur** » Thu Dec 14, 2006 2:23 pm

Stuart, I sent you another email with a place that still has their brumby bullbar jig and I have one more bloke getting back to me about some custom made stuff as nobody else seems interested in doing floor mount sports bars due to rust forming under them and loosing so much floor space. I'll let you know how we go.

Xtreme_RX · Post by **Xtreme_RX** » Thu Dec 14, 2006 5:48 pm

Wilbur is not the only one who can do sports bars too...

brumbyrunner · Post by **brumbyrunner** » Thu Dec 14, 2006 6:00 pm

do tell....

Soobeit · Post by **Soobeit** » Thu Dec 14, 2006 11:44 pm

Im interested in a new bull bar and sports bars for the brumby, just havent found the right ones yet, sounds like this is the go.