Rivnuts, Nutserts

Put your take on things that go into Subies here ...
User avatar
Phizinza
General Member
Posts: 1444
Joined: Mon Oct 10, 2005 10:00 am
Location: SA
Contact:

Post by Phizinza » Wed Oct 07, 2015 7:49 pm

Yeah, but it's a fancy tool with many other purposes, a rivnut tool only is a rivnut tool
Owned - 89 Brumby, 83 Wagon, 83 Leone 4WD Sedan, 83 Touring Wagon, 99 Outback
Own - 87 Brumby, 93 Liberty, 09 Forester
Offroading Subarus Facebook Page


User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Mon Feb 15, 2016 8:49 am

Phizinza wrote:Yeah, but it's a fancy tool with many other purposes, a rivnut tool only is a rivnut tool
yeah, and , it seems, if you only use lower case in the search function - rivnut nutserts - any date, post by Silverbullet, still comes up no matches

Found this on about page four of Sams recent activity :)

drill bit sizes on same kit Sam got I have sort of found imperial bits to be just a smidge closer than the 0.50 mm steps
of my metric drill bits

nutsert with ~ 4.85mm body found imperial drill bit for 3/16" is close - 4.76mm

next size up with ~5.85 mm body I grabbed a 15/64" bit - 5.95mm

and body with 6.7mm a 17/64" bit 6.75mm

and 11/32" [ 8.73mm ] for the 8.9mm body

User avatar
Subydoug
Junior Member
Posts: 988
Joined: Wed Feb 08, 2012 10:19 pm
Location: Carlisle WA

Post by Subydoug » Mon Feb 15, 2016 9:04 am

We got one of these types for work the other day. Using m6 Stainless rivnuts the thread galled and was basically chooched after about 3. Probably fine for mild steel rivnuts.

http://g02.s.alicdn.com/kf/HT1mKZ8FBFcX ... gOFbX1.jpg

Regards

Doug

Post Reply

Return to “Product Reviews”