Brumby Electric Widows
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
More Details ...
Ok - I've read through most of that & here is what I've got up to for now :
I went to the wreckers to find all the relavent bits ...
Then set about testing to make sure it all works ...
Note 1: The black module + blue plug ( the 'Brain' next to multimeter, it's usual home is located under dash - attached to hood release ) in the photo is what controls it all & makes it a lot easier to plug & play ...
Note 2: The Relay + Resistor with white plug ( it's usual home is under drivers seat ) is also required to keep it all running smoothly ...
Note 3 : The Auto Switch ( normally located on driver's door ) although not Essential, does make for a nice feature when combined with a central locking module on alarm system ...
Unfortunately that's as far as I got before having to move, I will have a go at the rest when I'm able to ...
I went to the wreckers to find all the relavent bits ...
Then set about testing to make sure it all works ...
Note 1: The black module + blue plug ( the 'Brain' next to multimeter, it's usual home is located under dash - attached to hood release ) in the photo is what controls it all & makes it a lot easier to plug & play ...
Note 2: The Relay + Resistor with white plug ( it's usual home is under drivers seat ) is also required to keep it all running smoothly ...
Note 3 : The Auto Switch ( normally located on driver's door ) although not Essential, does make for a nice feature when combined with a central locking module on alarm system ...
Unfortunately that's as far as I got before having to move, I will have a go at the rest when I'm able to ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Update ...
I found some useful info on power windows :
Will keep in mind for next project ...
Cheers, Bantum ...
Will keep in mind for next project ...
Cheers, Bantum ...
- Bantum
- General Member
- Posts: 1923
- Joined: Sun Jul 29, 2012 4:30 pm
- Location: Northern Territory + QLD
- Contact:
Sad ...
Sorry its gone nowhere atm - unfortunately I'm still stuck in Brisbane + car is back in Darwin - so nothing further has been done ...
I'm hoping to get back to it soon though, alternatively I could get my Brumby shipped here ...
Cheers, Bantum ...
I'm hoping to get back to it soon though, alternatively I could get my Brumby shipped here ...
Cheers, Bantum ...
- El_Freddo
- Master Member
- Posts: 12511
- Joined: Tue Oct 04, 2005 10:00 am
- Location: Bridgewater Vic
- Contact:
Mate that's rough! While my subi's are in the back yard my parts stash/bombs are almost a 2hr drive away and I find it frustrating! But I really can't complain compared to your situation.Bantum wrote:Sorry its gone nowhere atm - unfortunately I'm still stuck in Brisbane + car is back in Darwin - so nothing further has been done ...
I hope you get it closer to you soon!
Cheers
Bennie