XV Ute ...

Collection of automotive design / construct projects by Bantum ...

Moderator: Bantum

Post Reply

Do you want XV-UTE?

Maybe
30
81%
Maybe
2
5%
Maybe
5
14%
 
Total votes: 37
User avatar
Silverbullet
Senior Member
Posts: 2921
Joined: Mon Aug 23, 2010 6:20 pm
Location: Adelaide

Post by Silverbullet » Sun Jun 09, 2013 8:15 pm

I honestly don't know how you drew this with sketchup, I struggled to find enough shapes to draw my welding cart :rolleyes: Fantastic work, really professional looking.

Only problem I can see is the bed being too small practicality wise, after seeing an XV up close and personal, the distance from the front doors to the tailgate would make for a very small rear tray especially with the rear wheel stored in there and the fuel tank. Perhaps a longer wheelbase is needed?
Will it ever end!?
-EA81 TWIN CARB!!!!
-L series 5 speed
-Custom paint job
-2" lift
-Full custom re-wire
-L series front end
Image
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Thanks ...

Post by Bantum » Tue Jul 02, 2013 11:33 pm

60766244 wrote: ... Sensational. Up for some sort of Ausubaru Medal I think.

Put this one on your resume. ;)
Already done ... !
El_Freddo wrote:Too right! Hats off to you Bantum - I don't have the patience for this amount of work!

Looking awesome ;)

Cheers

Bennie
Thanks guys ... :mrgreen:
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Outback Ute ...

Post by Bantum » Tue Jul 02, 2013 11:45 pm

Silverbullet wrote: ... I honestly don't know how you drew this with Sketchup ... Fantastic work, really professional looking ...
Thanks ... Coming from a drawing background it's not too hard + I've cheated a bit by copying & pasting ... ;)
Silverbullet wrote: ... Only problem I can see is the bed being too small ... Perhaps a longer wheelbase is needed ... ?
Yep, I've covered that with the OutBack Ute version ... :D

The whole intent was for the XV-Ute to be a small, economical utility ute ...
& that it could be considered as a successor to the Brumby ... ;)
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Phat XV Ute ...

Post by Bantum » Sun Jul 07, 2013 11:25 pm

Just came across this :

Image

Glad to see someone else has the same idea ... :cool:

Link to larger image here ...

Cheers, Bantum ...

Edit : fix link ...
Top
User avatar
steptoe
Master Member
Posts: 11582
Joined: Thu Oct 06, 2005 10:00 am
Location: 14 miles outside Gotham City

Post by steptoe » Mon Jul 08, 2013 7:42 am

This beast above is taking into consideration Subaru's declaration they no longer wish to be in the agricultural sector - SUV's sell well :)
Top
User avatar
60766244
Junior Member
Posts: 586
Joined: Fri Nov 09, 2012 3:32 pm
Location: Kalamunda, Western Australia

Post by 60766244 » Mon Jul 08, 2013 7:44 pm

>scrolling down
>down
>not ba...
>ba... good. Not good.

Those merc wheels and the lowering :o

I might need to get some new eyes. :p

I like yours better Bantum! :D
Otter the 2004 Outback with all the fruit.
Image
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?

|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||

Top
User avatar
El_Freddo
Master Member
Posts: 12637
Joined: Tue Oct 04, 2005 10:00 am
Location: Bridgewater Vic
Contact:
Contact El_Freddo

Post by El_Freddo » Sat Jul 13, 2013 2:32 pm

60766244 wrote:I like yours better Bantum! :D
Me too!
steptoe wrote:This beast above is taking into consideration Subaru's declaration they no longer wish to be in the agricultural sector - SUV's sell well :)
Bugger that! They're leaving behind a sector that they filled quite well some time ago. It's about time they lived up to the name of the brumby again with a newer modern take on the same little brute ute they produced back then - but it still has to be functional and not all out luxury/safety orientated.

Bantum, could you knock up a long wheel base 4 door version for those family orientated drivers out there these days? Could also be another angle for this ute - but better than the Baja due to the longer wheel base and the rear wheel being situated in the middle of the carry/load bed.

Cheers

Bennie
"The lounge room is not a workshop..."
Image
El Freddo's Pics - El_Freddo's youtube
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

More ...

Post by Bantum » Mon Jul 22, 2013 4:04 pm

El_Freddo wrote: ... Me too ! ...
Ha, feel the love ... :)
El_Freddo wrote: ... Could you knock up a long wheel base 4 door version ? ...
Might consider it after finished this one ... ;)

Cheers, Bantum ...
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Sketched Up ...

Post by Bantum » Mon Jul 22, 2013 4:13 pm

Ok - I've started to put the results up on Whore house ...

Please rate it to get some interest going ... XV-Ute 2013

Still not 100% finished, but will continue to fineness ... ;)

Enjoy, Bantum ...
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Nearly done - Part 1 ...

Post by Bantum » Mon Aug 05, 2013 5:32 am

Ok - here are a few shots of it nearly finished :

Image

Image

Image

[imghttps://lh3.googleusercontent.com/pw/ACtC-3dGMz6gd7V1wERB55r2mGgyqabpvoKNb890nUhAzLokuxzjNY7m1y-DY9xxTfsTl3u-ndV4q_geB6WHUf3NwXx-_goNkkSzO_IqU_qgG0PKm7-_RoH2MVmpFaAyigzkDP9qcLThLzwn_-WuoU9b9PRR=w1276-h824-no[/img]



More on the next page ...

Cheers, Bantum ...

Edit : fixed links ...
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Nearly Done - Part 2 ...

Post by Bantum » Mon Aug 05, 2013 5:34 am

A few more shots ...

Image

Image

Image

Image


Will be looking to make a 3d printed version next ... :D

Cheers, Bantum ...

Edit : Fixed Links ...
Top
User avatar
60766244
Junior Member
Posts: 586
Joined: Fri Nov 09, 2012 3:32 pm
Location: Kalamunda, Western Australia

Post by 60766244 » Mon Aug 05, 2013 8:53 am

Image
11/10 Would buy!
Otter the 2004 Outback with all the fruit.
Image
Possible Improvements: Rigid 12db Phone Aerial Fitted, Air-compressor w/ Hose & Air-Tank, Jerry Holders, Lift, Nudgebar and Spots?

|| Ausubaru Wiki: New AUSubaru Wiki, About the Wiki || My Ex, Maple the Brumby, Rack, Lift Kit, Raptor-Liner Tray || Shed: Benches ||

Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Body Shell ...

Post by Bantum » Tue Sep 10, 2013 1:39 am

Small update :

I've ordered a Tamiya XV body shell, will have wait now & see what it looks like when I get it ... :D

Add : Also made some minor changes to the rear end ...

Image

Image

Image

Anybody pick the changes ?

Cheers, Bantum ...

Edit : Fixed links ...
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Montana ...

Post by Bantum » Tue Sep 10, 2013 1:45 am

60766244 wrote:
Image
11/10 Would buy!
Is this what you had linked to ?

Image

It looks good to ... :p

Cheers, Bantum ...
Top
User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Tue Sep 10, 2013 4:09 am

Bantum wrote: Image
Liking it muchly :cool:
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:
'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

... Its Arrived ...

Post by Bantum » Sat Sep 21, 2013 12:37 pm

Bantum wrote: ... I've ordered a Tamiya XV body shell ...
Well Its here ... :D ... ( only took Three weeks )

Out of the box :

Image

The XV Body :

Image

Some Extras :

Image

XV Front :

Image

XV Back :

Image

XV Side :

Image

Now to put it together - More to come ... :)

Cheers, Bantum ...
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Query ...

Post by Bantum » Sat Sep 21, 2013 1:16 pm

I was thinking of modifying the shell by Cutting / Gluing to get the desired result, any suggestions for suitable glue, etc ... ?

Cheers, Bantum ...
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

More XV's ...

Post by Bantum » Sun Sep 29, 2013 3:44 am

Meanwhile searching for other Subaru models I found this :

Image

1/43 scale from WiT's ... :cool: ... Only about $70 Aus ... :(

Taken from here : AmiAmi [Character & Hobby Shop] | WIT'S Complete Resin Model 1/43 SUBARU XV Satin White Pearl

I might get one of these too !

Cheers, Bantum ...
Top
User avatar
NachaLuva
General Member
Posts: 1930
Joined: Wed Aug 31, 2011 5:05 pm
Location: SE Melbourne

Post by NachaLuva » Sun Sep 29, 2013 6:38 pm

I would love to get 1/43 SUBARU Forester S/tb-STi 2000 Arctic Silver - AmiAmi but the price tag is a fair whack!
[SIGPIC][/SIGPIC]
Owner SubieLiftOz, lift kits for Subarus :twisted:
'97 Forester: EJ22E; 4" Custom Body Lift; JDM STi plated LSD; 20mm WRX RSB; Snorkel; Kings
Top
User avatar
Bantum
Senior Member
Posts: 2002
Joined: Sun Jul 29, 2012 4:30 pm
Location: Northern Territory + QLD
Contact:
Contact Bantum

Update ...

Post by Bantum » Fri Nov 08, 2013 12:51 am

Found some one with one of these :

Image

Now I just have to make a mould from the body shell ... :evil:

Ciao, Bantum ...
Top
Post Reply

Return to “Bantum’s Works”