Spotted (tas)

General Subaru Talk - Media / News / Stories ...
Post Reply
User avatar
MY_STI
Junior Member
Posts: 286
Joined: Thu Oct 06, 2005 10:00 am
Location: Australia West

Spotted (tas)

Post by MY_STI » Sat May 27, 2006 7:11 pm

A Red brumby at charcoal chicken in launceston around 1:30pm, had at least a 3" lift, aggresive 27"+ tyres, black rims and rollbar with driving lights atop. It would have looked even better dirty.

went around the block but by the time we got back it was gone.

Anyone seen it around?

User avatar
BRUMBERTY
Junior Member
Posts: 656
Joined: Tue Oct 04, 2005 10:00 am
Location: Cranbrook, Tasmania

Post by BRUMBERTY » Mon May 29, 2006 9:41 am

Did it have all the bundy and B&S stickers on it?
1989 Subaru WonderBrumby II
EJ22 Dual range AWD lifted, widened and much happier now thanks very much.

1991 L Series wagon, white and perfectly normal apart from the ticking, no I think that is normal.

Jet boat..webbered EA81 with a hybrid tin dish welded and glued to it.

User avatar
tassyraider
Junior Member
Posts: 87
Joined: Wed Dec 14, 2005 10:00 am
Location: tas

Post by tassyraider » Mon May 29, 2006 7:55 pm

hi iwas with SIR as we sometimes call him, i had a glance didnt see big bnt sticker as i had one on my Ttop had lil dirt on it .it was enought of a look to make us to go back but we missed it as sir said we should of put s/charger on my ute we would of got aroun quicker. sigh only for two weeks to put next prodject in to action cheerz mick :twisted:

User avatar
MY_STI
Junior Member
Posts: 286
Joined: Thu Oct 06, 2005 10:00 am
Location: Australia West

Post by MY_STI » Mon May 29, 2006 10:22 pm

had the bull horn sticker on the bonnet, didn't see anymore stickers, only noticed it at the last minute, too busy perving on an 05 sti in the left lane, brumby was on the right.

User avatar
legacytt
Junior Member
Posts: 215
Joined: Thu Oct 06, 2005 10:00 am
Location: Launceston,Tas

Brumby

Post by legacytt » Fri Jun 02, 2006 11:14 am

I was at TJA 4WD in Launie yesterday picking up a roof pod. They are a very "Conventional 4WD" place, usually servcing cruisers etc. However the mechanic was very quick to ask about my lift kit. Turns out they fiited the 4 inch kit into the Brumby mentioned here. He was very impressed with the kit and the whole lifted Subie concept. Although I laughed when he said the brumby was going to get an EJ20t "just bolted in, drive away".
Gen 1 Legacy GT 3inch lift and 28's

User avatar
MY_STI
Junior Member
Posts: 286
Joined: Thu Oct 06, 2005 10:00 am
Location: Australia West

Post by MY_STI » Fri Jun 02, 2006 4:47 pm

Small world, I assume its localish to launceston then, Very much like to see this 'bolt in, drive away' conversion. lol

User avatar
BRUMBERTY
Junior Member
Posts: 656
Joined: Tue Oct 04, 2005 10:00 am
Location: Cranbrook, Tasmania

Post by BRUMBERTY » Mon Jun 05, 2006 9:41 am

10mm or 17mm do you reckon?
Hell I even have some of them imperial ones!

Where do you put the bolts though?
1989 Subaru WonderBrumby II
EJ22 Dual range AWD lifted, widened and much happier now thanks very much.

1991 L Series wagon, white and perfectly normal apart from the ticking, no I think that is normal.

Jet boat..webbered EA81 with a hybrid tin dish welded and glued to it.

Post Reply

Return to “Subaru Chat”